Silver Shirt
Intro: Silver Shirt
Sew yourself a shirt out of crazy fabric; dance all night.
STEP 1: Cut Apart an Old Tee Shirt
Find a tee shirt that fits you. Cut it apart at the seems. Most tee shirts are made from a tube of fabric, so in addition to the seems, make two cuts straight down from the armpits.
STEP 2: Cut Fabric From Your Patterns
Using the pieces of the tee shirt as a pattern, cut out pieces of fabric. Add a seam allowance if you want the fit to be identical to the old tee shirt.
I wanted my silver shirt a little tighter, so I didn't bother with a seam allowance.
I wanted my silver shirt a little tighter, so I didn't bother with a seam allowance.
STEP 3: Hem the Edges
Hem all the exposed edges.
STEP 4: Sew the Pieces Together
Sew the front panel to the back panel. Sew the sleeves into tubes. Pin the sleeves to the front and back panels in the proper position and sew each sleeve to the body followed by sewing straight down from the armpit.
STEP 5: Try It On
Try it on. If it fits, carefully trim all the dangling treads.
STEP 6: Rock Out!
Drive a million miles out to the middle of nowhere. Make sure there's a lot of dust -- fine alkaline dust if possible. Dance all night.
Not only does this silver shirt perfect my 1980's German Industrialist costume, but it also deflects laser beams!
Not only does this silver shirt perfect my 1980's German Industrialist costume, but it also deflects laser beams!
17 Comments
aarushg 10 years ago
SkiTzCoRe 16 years ago
ewilhelm 16 years ago
carlossguzman 12 years ago
CybergothiChe 14 years ago
corinna.anni.roc 16 years ago
corey_caffeine 14 years ago
corey_caffeine 14 years ago
Ward_Nox 15 years ago
boyrock375 15 years ago
ThinkBeforeYouSpeak 15 years ago
dwootton 17 years ago
James (pseudo-geek) 16 years ago
CameronSS 16 years ago
Burning Man?
In The House Of Ill Repute 17 years ago
brad 17 years ago
ladyada 18 years ago