Introduction: Simple Nite Finder Mod
This mod for the Nerf Nite Finder is for anyone, even if you've never modified a dart gun before. This only goes about half as far as you can go with a Nite Finder, so also check other mods before saying, "I'm finished." All you need is a small Philips head screwdriver and the Nite Finder.
Step 1:
This step is simple but seems to take forever. Take the Nite Finder apart. Make sure you take the screws out slowly and carefully, because if one won't budge, it wrecks the whole process.
Step 2:
Now, with the gun apart, take out a little spring on the orange piece in the yellow box in the second picture.
10 Comments
12 years ago on Introduction
Your mod made my nite finder a pullback silencer. good job. But the bad thing is you can't shoot upside down.
12 years ago on Introduction
does it work or not work??? i would like to know
13 years ago on Introduction
Everyone disregard this mod. It takes out the spring that holds the catch.
All this mod does is makes your gun unusable.
Reply 12 years ago on Introduction
my gun is still usable this mod works
13 years ago on Step 2
It makes the pullback quiet......... otherwise the difference isn't very noticable.
13 years ago on Introduction
nice mod dude but why do u have 2 instructions out also i did a similar mod and this mod i did makes my NF dead silent
14 years ago on Step 2
i did this accidently to mine , it does increse the range , but makes it a basterd to load!
14 years ago on Step 2
Thats the catch, it keeps the plunger from firing, I don't know what removing the spring does though.
14 years ago on Step 2
wot dus it dooo to it?
14 years ago on Step 2
then wot?