Simple Pen Gun

Introduction: Simple Pen Gun

About: I'm a musician, maker, wannabe YouTuber, introvert, and above all a crazy cat guy.

There are many pen guns online. But to my knowledge, none of them can be made solely with a pen. So, I decided to create the first true "pen gun."

Step 1: Materials

For this project you will need:

A pen
Tape (optional)

Step 2: Disassembling the Pen

Disassemble the pen. Set aside the plastic tip, spring, and ink cartridge. The other parts can be saved for another project.

Step 3: Constructing the Gun

1. Slide the spring onto the bottom half of the ink cartridge. There should be a small lip that it will catch on. If you want the spring to stay on, you'll need to use a small amount of tape to hold it to the cartridge. This isn't nescessary, but it improves the gun.

2. Slide the cartridge and spring onto the plastic tip. To do this, you'll need to file or cut the tip slightly.

Step 4: Firing

You're finished! To fire the gun, simply pull back on the base of the ink cartridge and release.

WARNING: This gun can be quite powerful. Please don't fire it at people.

Simple Pen Gun 2.0 is here! Check out my page for the link, and while you're at it, check out my other work.

Be the First to Share

    Recommendations

    • Holiday Decorations Speed Challenge

      Holiday Decorations Speed Challenge
    • Plywood Challenge

      Plywood Challenge
    • Battery Powered Contest

      Battery Powered Contest

    6 Discussions

    0
    Rajat Uppal
    Rajat Uppal

    7 years ago on Step 4

    very nice..........very simple.............good gun without any cost.........i like it .......

    0
    Chikpeas Brother
    Chikpeas Brother

    Reply 7 years ago on Step 4

    Thanks a lot and thanks for subscribing! :D

    0
    Chikpeas Brother
    Chikpeas Brother

    7 years ago on Step 4

    Thanks for the encouragement. It's always nice to know when someone likes my work.