Skewer Ammo for Your BB Gun

by yalexander21

16K1545

Intro: Skewer Ammo for Your BB Gun

this is a simple instructable on how to make ammo for your bb gun

STEP 1: Wrapping

take about 1 and 1/2 inch of masking tape and wrap it around the middle of the skewer

STEP 2: Loading

push the skewer down the barrel of the bb gun then cock it
if your gun uses a spring not air compression after you cock it you should be able to push it down more
then shoot it as you usually would

46 Comments

bombmaker2 14 years ago

I made a couple hundred of these with my friend and I shot a rabbit with 2 of them. The first one went clean through and PINNED it to the ground then second one finished it off.

benicio1331 1 year ago

You are swine you vulgar little maggot. Don't you know that you are pathetic? You worthless bag of filth. As we say in California, I'll bet you couldn't pour piss out of a boot with instructions on the heel. You are a canker. A sore that won't go away. A zit on the butt of society. I would rather kiss a lawyer than be seen with you.
You are a fiend and a coward, and you have bad breath. You are degenerate, noxious and depraved. I feel debased just for knowing you exist. I despise everything about you. You are a bloody nardless newbie twit protohominid chromosomally aberrant caricature of a coprophagic cloacal parasitic pond scum and I wish you would go away.
You're a putrescence mass, a walking vomit. You are a spineless little worm deserving nothing but the profoundest contempt. You are a jerk, a cad, a weasel. Your life is a monument to stupidity. You are a stench, a revulsion, a big suck on a sour lemon.

Master Wasi 47 9 years ago

I tested it with my ak. It goes quite well. Thank you.

JuriusV 11 years ago

I have skewer ammo as well but its a metal skewer and it fire and penetrate well. to shoot it i use my homemade airsoft gun

LiftAndLove 12 years ago

i have a Daisy powerline (i think its a powerline 1000, but it might be a 1200

masterofsniping92 15 years ago

I replaced the smoothbore barrel with a rifled one from a Powermaster 66, made a shroud for the barrel so it would fit properly, and replaced the compression chamber with the one from the same Powermaster 66 because an o-ring on the stock compression chamber was worn out. It was worn out because I inherited it from my grandfather who hadn't used it in 20 years. he also never maintained it. I further customized it by making wooden handles and gave it a centerpoint 4x32 scope.

LiftAndLove 12 years ago

lol i did this a cuople times before i even heard about this instructable. i shot a can,
a bird, and my friend Valerie(well almost)

zupyo22 13 years ago

yeah i thought that it would be better if you used a blow dart gun dart rapped it in tape and shoved it down the barrel buried it 1/2 of an inch into a 2by4 so deadly

supersith22 15 years ago

Using the Red Ryder like you were, I found bamboo sparklers to fit nicely in the end of the barrel. I used that to light a huge gas bonfire it was awesome. i'll post a youtube link when I upload it

pirate8772 14 years ago

when u gonna post it cuz i wanna c!!!!

supersith22 14 years ago

 Wow I completely forgot about this =P


More Comments