Introduction: Small Easy Knex Gun With Magazine for 8-12 BB Balls, Can Also Shoot Paper or Pencils
This is my first instructable, this is my Knex gun with magazine! Has space for 8-12 BB balls and can also shoot paper balls/small thingeys and pencils. Very useful in classroom! :p
Step 1: Parts
You'll need this parts for your Knex gun;
5 yellow bars
5 blue bars
2 white bars
6 green bars (small ones)
1 orange piece
4 red pieces
6 blue rings
2 white parts
6 grey parts
10 dark grey pieces
1 or 2 rubber bands (I used 1 because when you use 2 the chance is that the pin will also fly out of the barrel that's dangerous (or use better connections between pin and bands))
5 yellow bars
5 blue bars
2 white bars
6 green bars (small ones)
1 orange piece
4 red pieces
6 blue rings
2 white parts
6 grey parts
10 dark grey pieces
1 or 2 rubber bands (I used 1 because when you use 2 the chance is that the pin will also fly out of the barrel that's dangerous (or use better connections between pin and bands))
Step 2: Trigger & Main Part
take 2 yellow bars, 3 red pieces, 1 blue bar, 1 green piece, the orange piece and 2 blue rings
attach the pieces like this:
attach the pieces like this:
Step 3: Magazine
This will be the magazine. Take 2 blue rings, 2 white parts and a grey part. (not the dark grey part)
(it's hard to see, but the grey part is between the 2 blue pieces to stop the balls from falling down. But make sure it's on the good side or else the magazine won't close and balls will shoot to all directions.)
(it's hard to see, but the grey part is between the 2 blue pieces to stop the balls from falling down. But make sure it's on the good side or else the magazine won't close and balls will shoot to all directions.)
Step 4: Magazine 2
the other parts of the magazine....
take 2 blue bars (that's all!)
attach like this:
take 2 blue bars (that's all!)
attach like this:
Step 5: Magazine 3
this is for closing the magazine
1 blue bar
1 grey part
1 dark grey part
1 green piece
make this and put it together with the rest:
1 blue bar
1 grey part
1 dark grey part
1 green piece
make this and put it together with the rest:
Step 6: Magazine 4
again other parts for the magazine:
1 white bar
1 red piece
2 grey parts
attach and put together with the rest: (watch the side where you put this thing on! Has to be on the side of the trigger)
1 white bar
1 red piece
2 grey parts
attach and put together with the rest: (watch the side where you put this thing on! Has to be on the side of the trigger)
Step 7: Magazine 5
sorry I forget the other step:
now it will become easy take the part you've made in the previous step and attach like this:
then put 2 green pieces between the grey and the white part:
now it will become easy take the part you've made in the previous step and attach like this:
then put 2 green pieces between the grey and the white part:
Step 8: Parts for Better Aiming and Decoration
take 2 dark grey pieces and 2 blue rings and make this: (I don't know how to explain this just see the picture: just attach the dark grey pieces to the yellow bars so it will look nice:
Step 9: Handle
this is the handle also easy:
2 yellow bars, 2 dark grey parts and 1 blue bar:
2 yellow bars, 2 dark grey parts and 1 blue bar:
Step 10: Pin & Rubber Band
now this is final: make the trigger just put a dark grey and a yellow bar together and insert it in the gun:
Step 11: Loading & Firing
see pictures: pull the pin, and pull the trigger to fire! If you want to shoot paper balls or pencils just pull back the pin, insert the things you want to shoot in the barrel and fire.