Space Goggles
Intro: Space Goggles
For our end of the world party I built a pair of glowing 'cyberpunk' goggles from electronic scrap and made a two part video on how I did it.
The only thing I purchased was a pair of cheep goggles to modify from dealextreme, everything else was removed from scrap electronics.
This is an easy soldering project suitable for beginners but could be done by twisting and taping wires. Please check out my videos, (part one links to part two) to see the project steps as I did them.
Materials:
Soldering Iron & solder
Goggles to modify
Epoxy
Superlue
Drill and bits
Permanent markers
Electrical tape
The only thing I purchased was a pair of cheep goggles to modify from dealextreme, everything else was removed from scrap electronics.
This is an easy soldering project suitable for beginners but could be done by twisting and taping wires. Please check out my videos, (part one links to part two) to see the project steps as I did them.
Materials:
Soldering Iron & solder
Goggles to modify
Epoxy
Superlue
Drill and bits
Permanent markers
Electrical tape