Introduction: Speedball Basics/ Equipment

About: i build custom paintball guns from scratch including one i drew up from scratch and im going to start on a Barret .50cal

This instructable will include things like Mask, Gun, hopper and co2
I will soon come out with one on tactics for speedball and tactical paintball

Step 1: The Mask

I would recomend this mask because it has a very wide field of vision and it has a thermal lenses

Step 2: The Gun

This is the gun I have It is pretty water resistant has a lot of accesory's and has semi 3 burst, 6 burst, and full auto up to 13 balls per second with a stock board

Step 3: The Hopper

For this gun I would highly recommend this hopper because it is reliable loads faster then the gun so you don't hafto worry about chopping balls. Also if the hopper breaks it is a well known brand so many paintball fields will have parts for it.

Step 4: The Power Behind You're Balls!

For the CO2 or air I would recomend CO2 because It is steady until it runs out when air It steadilly goes down as you use it because it is psi and as the psi goes down The force goes down. But it's all up to preferance