Star Wars Pistol

Introduction: Star Wars Pistol

About: Nobody ever reads these things...... exept for you.... you're doing it right now... good for you...

This is a star wars pistol. It was free and took half an hour to make.

Halloween Props  Contest

Participated in the
Halloween Props Contest

Halloween Photo Instructable Contest

Participated in the
Halloween Photo Instructable Contest

Be the First to Share

    Recommendations

    • Plywood Challenge

      Plywood Challenge
    • Plastic Contest

      Plastic Contest
    • Battery Powered Contest

      Battery Powered Contest

    24 Discussions

    0
    coolcrafter101
    coolcrafter101

    3 years ago

    Is this the one Han Solo uses?

    0
    MrR22
    MrR22

    Reply 2 years ago

    No, if you still care (And to anyone else who happens upon this in the future) - this is a DH17, commonly seen in the hands of rebels. Han Solo uses a much differently shaped DL-44.

    Screen Shot 2018-03-25 at 13.40.48.pngScreen Shot 2018-03-25 at 13.40.56.png
    0
    CharlieN17
    CharlieN17

    Reply 3 years ago

    I say yes

    Well, I made a cylander, then cut it in half at an angle. That was the handle. Then I made a rectangular cube and I put the handle on that. To make the trigger I took a peice of paper and rolled it up really tighly, then flattened it, cut it to size, then did the same with the guard. to make the barrel I rolled up a piece of paper tightly, and placed on top of what I already had. Then I made smaller cube, cut a small peice off, and cut that in half. tThen I took the other half of the cylander and evened it out, then placed it on the two small cubes, then placed that onthe rest of the gun. And that made the scope.

    0
    morrisona2022
    morrisona2022

    Reply 3 years ago

    That is amazing. Absolutely amazing. I'm gonna make one.

    0
    Cubster
    Cubster

    5 years ago on Introduction

    what is it made out of? can you please make a tutorial. Cause it's awesome!

    0
    CharlieN17
    CharlieN17

    Reply 3 years ago

    paper, printer paper

    0
    Slimy the Slime
    Slimy the Slime

    4 years ago

    epic. I'm going to make a rifle like this

    0
    Derick4546
    Derick4546

    7 years ago

    You should show instructions. Great work. The last message was a typo

    0
    Derick4546
    Derick4546

    7 years ago

    You should instruction. Great work!

    0
    Cyclone2019
    Cyclone2019

    8 years ago on Introduction

    Maby you could use some fiberglass resin and spray paint?

    0
    Cyclone2019
    Cyclone2019

    Reply 8 years ago on Introduction

    maby you could put some by because this is epic!