Sugru Ipod Touch Stand
Intro: Sugru Ipod Touch Stand
I always hated haveing to hold my ipod when watching a film or video so after seeing sugru I decided to try to make one myself. If you like this instructable then please vote.
Thanks.
Thanks.
STEP 1: What You Need.
To make the Ipod/Iphone stand you will need:
2x 5g packs of sugru.
1x scisors.
1x Ipod/smartphone.
2x 5g packs of sugru.
1x scisors.
1x Ipod/smartphone.
STEP 2: Construction
First you need to open the 1st packet of sugru and roll it into a sausage shape.
Then you will need to shape it around the ipod with some out of the back for support.
After that you will need to squash it into a more solid shape like a cradle (make sure its deep
and enough to hold the ipod sucrely and make sure the sugru fits around the ipod snugly .
Remove the ipod.
Then repeat with the second pack.
Finally leave it to cure for 24 hours.
Then you will need to shape it around the ipod with some out of the back for support.
After that you will need to squash it into a more solid shape like a cradle (make sure its deep
and enough to hold the ipod sucrely and make sure the sugru fits around the ipod snugly .
Remove the ipod.
Then repeat with the second pack.
Finally leave it to cure for 24 hours.
STEP 3: The Finished Product.
When the sugru has cured put it on a flat surface and then put you ipod in the stand.
And there it is a ipod stand to watch your movies on.
And there it is a ipod stand to watch your movies on.
Comments
as9 10 years ago