Sweet Revenge

by KnexFreek

13K39362

Intro: Sweet Revenge


 This is a pretty fun gun :)

Features:
- Great range
- Removable mag
- True trigger
- Comfy handle
- Very sturdy
- Looks Awesome!

i hope you like my gun, please subscribe!!
Thankyou :D



STEP 1: Read :)

 I formally apologize for the quality of the pictures :( I do not have a camera to use except for this cheap video camera. the camera i used to take the pictures for the intro was my neighbor's camera.
So good luck building and read the image notes, they will help.

STEP 2: Step One

 This is step one. Read all the image notes :)

STEP 3: Step Two

 This is step two. Read all the image notes :)

STEP 4: Step Three

 This is step three. Read all image notes :)

STEP 5: Step Four

 This is step four. Read all image notes :)

STEP 6: Step Five

This is step five. Read all image notes :)

STEP 7: Final Step

 Add a rubber band onto the mag and make sure the mag is in GOOD. If not go back to that one step and add more tape. The mag must be in firm. Sometimes the rubber band on the mag wont completely push up the blue rods. If that happens just push them up using your hand :)

Have fun and remember to always shoot at family members and other living objects. 

HERES YOUR COOKIE!!!!!!

STEP 8: Who Has Built the Gun??


Picture Number:

1.  KnexFreek's 

2.  KnexMaster7000's

3. knex_builder_freak's

4. Kenexinator's

5.  Ikedog1995 BUILT TWO!!!!!

6.  Pretty P's

7.  Abused Waffle's

8.  Muffinslayer2's

9.  mikstr2's 

10. Starfrog6's

363 Comments

haijimmy030 10 months ago

i would recommend that you show every single steps and the parts required to build. Plus i was quite confused at step five as it was nothing like the gun i was building please try to add a lists of the things required or say like that part needs to make the same step such as step five where i just think it only needs to make another one of step 3 4 and 5 i think plus i did not know it takes a lot of peices

knexkeiron2010 13 years ago

I built this gun it's awesome!! I got my knex banned for a week cos of it :( it was torture

wiiking2015 12 years ago

how the h*** does the f****** mag work

Aggressive ghost 132 3 years ago

Easy the rubber band brings the blue rod up to the barrel of the knex gun then pull the trigger and repeat

fishbob1234 11 years ago

you made me scratch my computer screen >:(

fishbob1234 11 years ago

looks awesome 5*! with i had eneugh yello connecters though.

Element Force 11 years ago

if you haven't break the gun hopefully can you tell me how many yellow connectors does the gun have

knexboy586 11 years ago

READY FOR AN APACOLIPZE 5*

msmith46 12 years ago

gave up unfortunatly due to having gotten to certain bits many times and then something has changed or somethings been missed out :( looks like a good gun tho

jake scythe 12 years ago

instead of putting the orange connectors in the front on the top i left a space so i could put in a removeable safety. I do it with all of the guns i make.

glugnar 12 years ago

You know, it would be really helpful if you say that you need this blue/gray connector part so somebody like me doesn't waste an hour just to find out you dont have all the parts. -_-
*_>*Glugnar*<_*

glugnar 12 years ago

So many y-connectors :(

dwksideas 12 years ago

may i ask how o you aim when it has the three grey connectors in the front and hpw good i the acurasy on this gun
More Comments