Today we are Testing Varathane Vintage Aqua wood stain, on several different species of wood, such as Common lumber, White Pine, White Oak, Red Oak, Maple, Poplar and Cedar.

I have also included the video from my Youtube channel

Step 1: Before

This is what the lumber looks like before staining, when staining with this product, brush on and let the stain set for about 5 minutes, then wipe off the excess and let dry.

Step 2: Common Lumber

This is what the Common Lumber looks like with the Vintage Aqua stain, it gives the wood a real different look, I love it

Common Lumber is 2" x 4"'s and 1" x 2" lumber that you can buy at Lowes or Home Depot

Step 3: White Oak

This is what the White Oak looks like with the Vintage Aqua stain, it doesn't look to good on the White Oak, that's my opinion

Step 4: White Pine

This is what the White Pine looks like with the Vintage Aqua stain, it looks good on the Pine wood, I love it

Step 5: Poplar

This is what the Poplar looks like with the Vintage Aqua stain, it gives the Poplar a real different look

Step 6: Maple

This is what the Maple looks like with the Vintage Aqua stain, it doesn't look as good as some of the woods

Step 7: Red Oak

This is what the Red Oak looks like with the Vintage Aqua stain, I love how it highlights the grain in the Red Oak

Step 8: Cedar

This is what the Cedar looks like with the Vintage Aqua stain, it gives the Cedar a real different look, I love it

Step 9: Finish

Thanks for checking out my Instructable, hopes this helps someone that wants to use the Varathane Vintage Aqua stain.

Note that I just applied one coat to each of these pieces of wood, it would look different with multiple coats

Introduction: Testing Vintage Aqua Stain