The Assassin
Intro: The Assassin
This is a small, powerful, turret pistol.
Stats: Range 70 feet.
True trigger
Trigger guard
Sturdy
Compact
Has a turret
Looks Sick
Please dont hate on this gun, it upsets me to see someone give it a half a star rating. Dont hate, celebrate!!!!! Thanks knexers!!
I give Zak 75% credit for this gun.
!!!!!SUBSCRIBE!!!!!SUBSCRIBE!!!!!SUBSCRIBE!!!!!!
STEP 1: Parts Needed!!
Credit for the parts list go to: KnexBuilderFreak and KnexSuperBuilderFreak!!!!!THANKYOU!!!!!
Other:
Connectors:
Yellow: 18
Yellow: 18
Green:5
Red: 5
White: 7
Orange: 6
Light Grey: 19
Grey: 32
Blue: 2
Rods:
Green: 68
White: 31
Blue: 10
Yellow: 1
Black rod for ramrod
Other:
Y clip: 4
Tan clip:2
Blue clip: 2
Blue clip: 2
Silver spacer: 2
WARNING:
DO NOT BUILD THIS GUN IS YOU ARE NOT GOOD WITH KNEX.
This is an advanced, gun it is complicated to use, if you don't know knex very well.
WARNING:
DO NOT BUILD THIS GUN IS YOU ARE NOT GOOD WITH KNEX.
This is an advanced, gun it is complicated to use, if you don't know knex very well.
STEP 2: Turret
how to make the turret
STEP 3: Step One.
STEP 4: Step Two.
STEP 5: Step Three.
STEP 6: Step Four.
Replace the white connector with a yellow!!!!!!! OMG
STEP 7: Step Five.
Finishing. Also don't forget to add a band that goes from the trig to some spot so that the trigg moves intothe right place
292 Comments
The Knex Inventor 7 years ago
Made this a long time ago. It was the first turret gun that I made that worked.
krwchampion2 10 years ago
metalsonic 11 years ago
Blorph 11 years ago
wout147 12 years ago
dr. richtofen 12 years ago
but i modded it a bit, and now it is a rifle, i know its ugly now, but it shoots good!
TheKnexDemon 12 years ago
Shame it's broken up, would of ask you to post the mods
dr. richtofen 12 years ago
-the red dot:
well, i used tape + waterproof markers (or something like that)
Attached via an yellow connector + white rod + y-connectors on the top of the gun
-Grip:
blue 3d's or white connectors on an yellow rod, attached with two y connectors and white rods in front of the trigger guard
-stock:
you see the red connectors on the top of the normal assasin above the ram rod?
Change the white rod in those for an blue rod. On that blue rod, put an green connector on both sides. Than change the green connectors above the handle on the back of the gun for white connectors. Than build the stock shown in my pictures, shouldn't be too hard. and attach grey rods on the green connectors on top.
-Handle: the normal handle without the sticking-out white rods. Put knex tires on it, than change the bottom and so s in my pictures to reïnforce the handle and stock.
Well.. I hoped this helped you a bit, tell me if you mod it and/or like it
TheKnexDemon 12 years ago
KnexFreek 12 years ago
dr. richtofen 12 years ago
Kaiven 12 years ago
muffinslayer2 14 years ago
DB2016 12 years ago
...
That wasn't directed at you, it's overused, and funny only when used informally.
KnexFreek 14 years ago
Furloy 13 years ago
muffinslayer2 14 years ago
KnexFreek 14 years ago
muffinslayer2 14 years ago
muffinslayer2 14 years ago