The Beeper

Introduction: The Beeper

About: Electronics and Software Hobbyist. Let's see what I come up with... into #DoctorWho, #ESP8266, #Arduino, #WebDevelopment

A little device that constantly beeps.

Step 1: Explenation

If you turn the pointiometer (Variable Resistor) the beeping will go faster/slower.

Step 2: Materials

1. 555 timer chip
2. 220r resistor
3. 50k variable resistor
4. 36uf capacitor
5. 5v piezo beeper
6. breadboard

Step 3: Hook Up

Now you just build the circuit from the (messy) diagram.

Step 4: Finish

Now just power it and it should start beeping.

123D Circuits Contest

Participated in the
123D Circuits Contest

Supercharged Contest

Participated in the
Supercharged Contest

Be the First to Share

    Recommendations

    • Reclaimed Materials Contest

      Reclaimed Materials Contest
    • Made with Math Contest

      Made with Math Contest
    • 3D Printed Student Design Challenge

      3D Printed Student Design Challenge

    6 Comments

    0
    Luigi Pizzolito
    Luigi Pizzolito

    Reply 6 years ago on Introduction

    I got it from a chinese service called taobao.

    It's also on ebay for $3.44 each

    http://www.ebay.com/itm/Mini-170-Tie-Points-Solderless-Breadboard-Prototype-Arduino-PIC-PI-PCB-/171435892749?pt=LH_DefaultDomain_3&var=&hash=item27ea60200d

    0
    audreyobscura

    Can you orient your circuit diagram so it isn't a mirrored flip of what you made? Thanks for sharing!