The Bischoff 720 A.T.S (Accurate Targeting System)

Intro: The Bischoff 720 A.T.S (Accurate Targeting System)

Check my Scorpion 360 C.D.M too!

Here it is: The Bischoff 720 A.T.S

This is my biggest and most sweet knex gun, and the shooting system is inspired on Killerk's firing system
It has a range of at least 175 ft and the accuracy is up to 110 ft!
I think it's my personal best because of the range.
Very fun when sniping on targets.

Pros:

-Kick ass design
-Can pierce a bucket from a distance of 3.5 m
-True trigger
-Two handles
-Very accurate
-Very powerful

Cons:

-The bipod isn't foldable

For short:
It's a very recommandable sniper rifle.

STEP 1: Collecting Materials

Rods:
12 greys
8 reds + 1 red (bullet)
7 yellows
29 blues
114 whites
108 greens

Connectors:
110 yellows
44 greens
18 light greys
28 oranges
22 greys
32 reds
6 whites
2 dark blue

Exotics:
1 tan clip
2 metallic blue clips
3 y-shaped connectors
8 blue spacers
2 gray spacers

Also needed:
2 rubberbands
1 snapped rubberband
1 small rubberband
normal tape
duck tape

This is what you'll need to make the gun.

STEP 2: Upper Stock

This part isn't necassery but it makes the stock a lot more resistance proof.

STEP 3: Bullet Holder

This part is for letting go of the bullet when you pull the trigger.

STEP 4: The Barrel

The most time consuming and finger torturing part of the gun, but it's necassery.

STEP 5: The Trigger

This part is very necassery, assuming that it locks the bullet in place

STEP 6: The Bi-Pod

This part isn't necassery but it comes in handy when sniping because you will have a stable base to aim.

build it twice.

STEP 7: Rubberband Shooter

This part is to tie the rubberband in place and so that you can pull back the band.

STEP 8: Stock

This part is pretty important for looks, strength and, it makes a comfortable handling when shooting.

Pic 5 needs to be built twice.

STEP 9: Barrel Bars

This part is required because if you would'nt put it on, the barrel would be all shaky and that's a less accurate shot, which is annoying.

STEP 10: Handle Bars

These parts are for a more comfortable handling of the gun.
and they spare you some painful fingers.

STEP 11: The Bi-Pod 2

Connect the two bi-pod sides as shown.

STEP 12: Putting Together the Barrel

pic 1: get the pieces
pic 2: bullet holder + barrel
pic 3: put them together
pic 4: barrel + barrel bars
pic 5: put them together
pic 6: rubberband holder + barrel
pic 7: put them together

Barrel Completed.

STEP 13: Trigger + Barrel

Connect the trigger as shown on the pics.

STEP 14: Trigger + Stock + Handles

pic 1: Trigger + Stock
pic 2: Put them together.
pic 3: Trigger and Barrel + Handles
pic 4: Put them together.

Basic model completed.
View next steps on how to load, which ammo you should use, how to put the trigger rubberbands and how to assemble the Bi-Pod.

STEP 15: Ammo

The bullet is a red rod with a tan clip on the front and duck tape on the back for some stabilising when in the air.

STEP 16: How to Put on the Trigger-rubberbands

Put the rubberbands as shown.

STEP 17: How to Load

Put the firing band behind the tan clip.
pull it back.
click it on the y-shaped connector.

STEP 18: Assemble the Bi-Pod

Put on the bi-pod as shown on the pictures.

STEP 19: Your Done!!!

Well,
You've built yourself the Bischoff 720 A.T.S
Have freaking much fun with my knex gun!!!

Comments

[knex dude 2000]

epic

[coreyt]

hey viccie is this a counter tension trigger im pretty sure but just wondering

[kray953]

yes it is and you need a lot of bands on the trigger

[ol987986]

Thats bull i only used 2 and it is fine

[PieMaster777]

I tried to build this but i didn't have enough pieces so i built a pistol version that resembles a desert eagle O.o

[coreyt]

edit i built it and i relise how stupid of a question that was any way i cant get it to work right there was no way i can get a 64 to stretch that far so im using two but it keeps misfiring any ideas??

[coreyt]

sorry for all these posts its working awesome now im using killerks srv2 round with duct tape fins and 1 64 on each side (i modified the front) and it is producing great ranges it hits the 150 foot mark with only a slight angle but i havent shot it angled yet cos im scared of losing the ammo lol anyway great sniper and thanks

[tytiger33]

I know its a late reply, but could you show pics of the mod

[ol987986]

yo victor,can i use your siprani mech on a pistol im making, pretty plz?
it has a range of 70 foot and ill give u credit in the intro

[jedi_knight]

After Building your siprani rifles and liking the simplicity of them i decided to build this one and i only have one thing to say about this gun...
IT'S AWESOME!  first off i love the presure trigger i have never seen one of those incorperated into a knex gun before. The only thing that scares me is the firing mechanism, lets just say i have had tons of self inflicted injuries due to the miss fire of the sr- v1 LOL! but this one seems pretty stable with pressure trigger and all. Lastly how do you make those fins on the bullet? i have tried before to make them and they always make my bullet curve in the wrong dirrection.

[Pizzapie500]

I MADE IT!!!! WOOHOO!!!! Only problem is that the trigger on mine doesnt work...

[Pizzapie500]

I decided to 5* because this is my 1st knex gun i made

[smattman22]

btw it's wouldn't the ' replaces the o :) by the you're my second fav builder. i am canadian is my #1

[Skreetsha]

With very good reason, i got inspired by him and The Jamalam to start posting stuff, you should thank him for that. Lol, don't.. it wil make me look stupid ;)

[smattman22]

k :)

[glugnar]

danget to much peices

[bighead5454]

pic 1 is down the barrel and ammo rail 2 is the stock ammo holder 3 is th hanle 4 is the barrel 5 is ammo and 6 is the aiming sysstem thing this is my shotgun thing i only call it a shotgun cause it looks like one sears mods to the MSR if you want to see the slideshow

[Skreetsha]

yeah my bad but i just wanted to impress people because im still a rookie in the knex gun instructable bussines (bussines LOL)

[Sting Teddy]

dude you're a legend in knex guns... along with: I_am_Canadian, Oblivitus, dsman?????, TheDunkis, Ironman69, DJ Radio, Darth Geko Man, The Jamalam, etc. You and IAC are my favourite :D

[Sting Teddy]

edit: dude you're a legend in knex guns... along with: I_am_Canadian, Oblivitus, dsman?????, TheDunkis, Ironman69, DJ Radio, Darth Geko Man, The Jamalam, etc. You and IAC are my favourite :D (forget The Jamalam, urghh)