Introduction: The Sukito TS-1120 Dune Buggy
Check my A.D.U Bazooka 1140 too!
This is my new dune buggy!
It has some super sweet options and a cool design!
This project started out as a truck with two suspension bars making it almost able to drive over anything but this looked way better!
Nothing more to say so heres some pros and no's:
Pros:
-Independent suspension.
-Crash impact bumper.
-Durable.
-Not complicated to build.
No's:
-Wheels are the weak point.
You likey?
Let's get to building then!
This is my new dune buggy!
It has some super sweet options and a cool design!
This project started out as a truck with two suspension bars making it almost able to drive over anything but this looked way better!
Nothing more to say so heres some pros and no's:
Pros:
-Independent suspension.
-Crash impact bumper.
-Durable.
-Not complicated to build.
No's:
-Wheels are the weak point.
You likey?
Let's get to building then!
Step 1: Parts List
Connectors:
-19 greens
-25 light greys
-10 reds
-49 greys
-37 yellows
-14 dark blues
-26 purples
-4 oranges
Rods:
-3 red rods
-6 yellow rods
-10 blue rods
-63 white rods
-64 green rods
-2 bendy grey rods
Rubberbands:
-4 double-folded, small, rubberbands.
Exotics:
-13 Y-shapes
-2 tan clips
-1 steering wheel
-24 light blue spacers
-13 grey spacers
Wheels:
-4 smallest black wheels
-4 medium rims
-5 medium tires
-1 grey gear without tan clip space
Got the pieces ready?
Let's move on then!
-19 greens
-25 light greys
-10 reds
-49 greys
-37 yellows
-14 dark blues
-26 purples
-4 oranges
Rods:
-3 red rods
-6 yellow rods
-10 blue rods
-63 white rods
-64 green rods
-2 bendy grey rods
Rubberbands:
-4 double-folded, small, rubberbands.
Exotics:
-13 Y-shapes
-2 tan clips
-1 steering wheel
-24 light blue spacers
-13 grey spacers
Wheels:
-4 smallest black wheels
-4 medium rims
-5 medium tires
-1 grey gear without tan clip space
Got the pieces ready?
Let's move on then!
Step 2: Roof
This is the roof that can break the drivers fall when it topples over.
Build it once.
Build it once.
Step 3: Collect the Driving Wheels
These are the wheels that are the best for this car.
Get them!
Get them!
Step 4: Fake Engine
I know it's not needed but it just made it look cool.
Step 5: Frame (1)
This is the front of the frame.
Build it once.
Build it once.
Step 6: Frame (2)
This is the back part of the frame.
Build it once.
Build it once.
Step 7: Frame (3)
This is the front bumper of the frame.
Build it once.
Build it once.
Step 8: Frame (4)
This is the cab in the middle-back of the buggy.
Build it once.
Build it once.
Step 9: Frame (4)
These bars are the strength bars for the suspension together with the blue spacers.
Get them!
Get them!
Step 10: Reserve Wheel
This is the wheel that you can use if you lose one of your wheels.
Step 11: The Suspension
This is my independent suspension system.
Build this part twice.
Build this part twice.
Step 12: Assembly
Any problems or questions?
Ask them in a comment and i will reply as soon as possible.
Ask them in a comment and i will reply as soon as possible.
Step 13: You're Done!!!
Well, you've built yourself the Sukito TS-1120 Dune Buggy!
Have freaking much fun with my knex cart!!!
-Viccie.B1993-
Have freaking much fun with my knex cart!!!
-Viccie.B1993-