The X685 VORTEX
Intro: The X685 VORTEX
This is a huge, bulky, difficult-to-use Giant ferris-wheel-turned-gatling-gun.
it does, however, fire at a massive 2000 or more rpm. Yes, 25 bullets in under a second.
This instructable is made in 3 main parts: the wheel, the frame, and the barrels.
Be warned, as this gun requires a huge amount of pieces!
it does, however, fire at a massive 2000 or more rpm. Yes, 25 bullets in under a second.
This instructable is made in 3 main parts: the wheel, the frame, and the barrels.
Be warned, as this gun requires a huge amount of pieces!
STEP 1: The Wheel, Part 1
A pretty easy step.
Pieces:
50 blue 3d connectors
50 purple 3d connectors
73 white rods
2 Green rods
Make 24 of pic. 2 and 1 of pic 3.
Pieces:
50 blue 3d connectors
50 purple 3d connectors
73 white rods
2 Green rods
Make 24 of pic. 2 and 1 of pic 3.
STEP 2: The Wheel, Part 2
An even easier step
Pieces:
48 gray rods
1 black rod
6 White connectors
2 silver spacers
2 Brown tabbed connectors
2 blue spacers
1 Commando connector
Pieces:
48 gray rods
1 black rod
6 White connectors
2 silver spacers
2 Brown tabbed connectors
2 blue spacers
1 Commando connector
STEP 3: The Wheel, Part 3
Connect the 2 parts of the wheel. you should now have a ferris wheel about 2 feet in diameter.
STEP 4: The Frame, Part 1
The first part of the frame: a tower
STEP 5: The Frame, Part 2
The second parts of the frame: two supports
STEP 6: The Frame, Part 3
The third part: the motor cage
STEP 7: The Frame, Part 4
The fourth part: the bottom piece
STEP 8: The Frame, Part 5
the Fifth part, another tower
STEP 9: The Frame, Part 6
The sixth part: the wheel supporter
STEP 10: The Frame, Part 7
The Other Tower
STEP 11: The Frame, Part 8
The Top Part
STEP 12: The Frame, Part 9 (Assembly)
Assembe Steps 1-11
STEP 13: The Barrels, Part 1
Build 25 of these Babies
Pieces: per barrel
8 Gray connectors
3 orange connectors
~2 rubberbands
2 Light gray connectors
2 Brown connectors
1 white rod
1 blue rod
1 gray rod
2 red rods
3 silver spacers
1 blue spacer
Total: 26 pieces
200 Gray connectors
75 orange connectors
~50 rubberbands
50 Light gray connectors
25 white rods
25 blue rod
25 gray rod
50 red rods
75 silver spacers
25 blue spacer
Total: 650 Pieces
Pieces: per barrel
8 Gray connectors
3 orange connectors
~2 rubberbands
2 Light gray connectors
2 Brown connectors
1 white rod
1 blue rod
1 gray rod
2 red rods
3 silver spacers
1 blue spacer
Total: 26 pieces
200 Gray connectors
75 orange connectors
~50 rubberbands
50 Light gray connectors
25 white rods
25 blue rod
25 gray rod
50 red rods
75 silver spacers
25 blue spacer
Total: 650 Pieces
STEP 14: The Barrels, Part 2
Attach them
STEP 15: Firing and Loading
to load, pull back the Ramrod and put in a yellow rod.
To fire, press the black swithc DOWN. Wait for it to speed up then pull the lever / handle.
To fire, press the black swithc DOWN. Wait for it to speed up then pull the lever / handle.
216 Comments
Knex_Gun_Builder 15 years ago
Darth Trainman 15 years ago
Knex_Gun_Builder 13 years ago
k-n-e-x(leaved ibls) 13 years ago
182515 14 years ago
gerrits13 14 years ago
Fred the Penguin 14 years ago
An Villain 14 years ago
legolover5 14 years ago
builder968 15 years ago
Darth Trainman 15 years ago
Der Bradly 15 years ago
Darth Trainman 15 years ago
Der Bradly 15 years ago
Darth Trainman 15 years ago
Der Bradly 15 years ago
Darth Trainman 15 years ago
DrWeird117 15 years ago
Darth Trainman 15 years ago
DrWeird117 15 years ago