Introduction: The Skateboard Light.
Will not last long to build this.at 30 min.Almost no cost. Good work!!
Step 1: Required the Following Things
-1 wood panel
-9V rechargable/normal battery
Step 2: Draw Locations
Draw the hols location and LED'S.
Step 3: Palace on the Board the Wood Panel
It will not appear on the other side of the board screw.
Step 4: Palace
Put the reservoir leds and the battery case
Step 5: Behold, the End Result. Watch the Finish Video
Connect the leds in the battery.The cables attach it to the axis of the board.
Participated in the
Make it Glow!