Introduction: The Storm 222 V1.1 Knex Pseudo Semi Auto Rifle
Hi guys, this is my third instructable, and the third of five in the storm series. I believe that this rifle is the first of its kind. It uses a mechanism that i invented, and a similar one to this was released by banana inventor, but it uses the same concept of a gear or cog having its rotational force transferred to one perpendicular to it.. Before i get loads of comments about stealing from banana inventor, look at my forum topic, which was released a while ago.
V1.0: I made a concept mechanism for a gun which was a chain driven semi auto, it didn't have a body and was a bit of frame with a bare mechanism.
V1.1: I made the faulty much better with secure pieces, and made a frame
1 pull of the trigger = one shot, no cocking
a decent stock, better than the old storms
as many shots as you like, just put a long chain on
Step 1: The Stock
This is the stock or butt of the gun, just follow the pictures to build it
Step 2: Main Body Step 1: Get Parts
Get everything in the pictures
Step 3: Body Step 2: Building and Connecting
Follow the pictures
Step 4: Front Section
This is the front of the gun, follow the pictures
Pictures 10 + 11 are the chain
Step 5: Adding Rubberbands, Loading and Firing
okay follow the pictures.
1. add from here
2. to here
3/4. you're done!
Step 6: Loading and Firing
this gun is a bit different to most: you rotate the wheel on the side back as far as possible so that the rubberband is nearly under, then you put the chain on and every time you pull the trigger, it shoots.
That's all, if you have any Q.s, pm or comment.
SUPPORT TEH BUNNEH!!!!!(\_/)
Participated in the
The Instructables Book Contest