Thirty Second Party Popper Cannon
Intro: Thirty Second Party Popper Cannon
This is a quick reloading party popper cannon using a piece of tube which fires a pop-rivet a fair distance.
There are similar designs around, but the novelty here is the 9/32" tube which is a push fit into the popper. A padded lollipop stick (as in another design) may make better ammo, but I was aiming for minimal reload time.
Usual warnings apply - DO NOT FIRE NEAR PEOPLE OR ANIMALS. The 'meow' in the video is Eric, and yes, I did check that he'd gone before I fired it. Pedants will notice that the cannon took just over thirty seconds, but I did spend some time showing items to the camera.
This is my first Instructable and video (using Video Edit Magic).
Andy.
There are similar designs around, but the novelty here is the 9/32" tube which is a push fit into the popper. A padded lollipop stick (as in another design) may make better ammo, but I was aiming for minimal reload time.
Usual warnings apply - DO NOT FIRE NEAR PEOPLE OR ANIMALS. The 'meow' in the video is Eric, and yes, I did check that he'd gone before I fired it. Pedants will notice that the cannon took just over thirty seconds, but I did spend some time showing items to the camera.
This is my first Instructable and video (using Video Edit Magic).
Andy.
15 Comments
CzechChrisOut 9 years ago
Wow, cool design. I modeled and 3D printed my own Party Popper Cannon with a using my Up 2 Plus printer. Check it out here https://www.youtube.com/watch?v=78F0b8u1-qg. My models are available for purchase as well.
popcorn4lunch 13 years ago
rdm_box 13 years ago
pie R []ed 14 years ago
padricjoe 14 years ago
Colonel88 14 years ago
AndyGadget 14 years ago
Fizzxwizz 15 years ago
AndyGadget 15 years ago
Wafflicious 15 years ago
Scotish 15 years ago
Tmbo17932 15 years ago
Tmbo17932 15 years ago
AndyGadget 15 years ago
GorillazMiko 16 years ago