Introduction: Tic Tac Pocket Heaphone Splitter
Pocket sized heaphone splitter made using £0.99 heaphone splitter and empty tic tacs packet!
Please feel free to show support and comment any idea or if you made this project I would love to see you pictures!
Step 1: What You'll Need:
What you need:
Empty Tic Tac Packet
Copydex or other adhesive glues
3.5mm Headphone splitter
Newspaper or some sort of cover
Heaphone splitter:Belkin 3.5mm Headphone Splitter Dongle https://www.amazon.co.uk/dp/B006W95DDW/ref=cm_sw_r_awd_uRLWvbTS3HWSW
Copydex:Copydex 4598 multi purpose adhesive, 125ml, EACH https://www.amazon.co.uk/dp/6040862890/ref=cm_sw_r_awd_LSLWvbPT271ZM
Step 2: Step One
Make a hole in the tic tacs packet
Use the screwdrive to twist and punture the bottom of the packet. So that the hole is big enough for the jack to fit in
Step 3: Step Two
Cut along the sticker seal and pull the lid off the packet; then, push the headphone splitter jack the the hole so it is poking out of the tic tacs packet
Step 4: Step Three
Use the glue to stop the jack from coming out of place and WAIT for it to dry
Step 5: Last Step
Put the lid back on and push the splitter through the cap of the tic tacs packet and you're done!
Thanks for reading to the end of my first instructable, hope you enjoyed my idea and I look forward to sharing more!
7 years ago on Introduction