The side mirrors on this Kia Rio are slack. Time to fix this rattling issue.

Step 1: The Access Panel.

The mounting hardware is hidden behind a plastic panel. Using a knife I carefully pried the panel off.

Step 2: Tightening.

Using an elbow type Phillips head screwdriver, I tightened the 3 screws holding the mirror in place. I did the same process for example other mirror.

Now the mirrors are secure and safe for the road.

Be the First to Share

Recommendations

3D Printed Flexi Snake by Penolopy Bulnick in 3D Printing

56 11K

Glow in the Dark Molecules by mphatsosimbao in 3D Printing

25 3.1K

Mobile Folding Craft Station by Yvette M in Woodworking

136 6.7K

A Pocket Sundial From a Broken Pocket Watch! by JGJMatt in Metalworking

97 8.6K

Game Design: Student Design Challenge
Big and Small Contest
Make It Bridge

Tightening a Loose Side Mirror.

Step 1: The Access Panel.

Step 2: Tightening.

Be the First to Share

Recommendations

Comments

Introduction: Tightening a Loose Side Mirror.

Step 1: The Access Panel.

Step 2: Tightening.

Be the First to Share

Recommendations

Game Design: Student Design Challenge

Big and Small Contest

Make It Bridge

Comments