Introduction: Towel Chicken

About: Concocted Creations From The Mind Of A Maker.

Hey everyone, in this instructable I'll be showing you how to make a chicken made from a towel, so let's get started!

Step 1: Find a Towel

All you need to do to begin is to find a towel, the size of it is really all up to you, the bigger the towel the bigger the chicken, and vice versa.
I used what i would call a big wash cloth.

Step 2: Lay the Towel Out

After you find the right towel the next thing you need to do is to lay it out somewhere, I just put it down on the floor and made sure I had enough space to move around.

Step 3: Roll It Up

Now that you have the towel laid out you need to roll it up, start at one end and roll inward, then repeat the step on the other side, have the rolls meet in the middle as show.

Step 4: Preparing for the Pull

After that's done you need to flip the towel over and fold it in half, it should look like this:

Step 5: Pull Out the Corners

Once folded in half you can pull out the tips of the towel, this part is not needed but it makes the next step much easier!

Step 6: The Pull

The final step is the pull, to do that first you need to grab all 4 corners of the towel, then make sure to face it so when you pull out you are pulling it opposite of the way you folded it, after positioning it, just pull!

Step 7: Complete Chicken!

Then your done!Now you can bet your friends that you can turn a towel into a chicken!


MakerBot Challenge

Participated in the
MakerBot Challenge

Nostalgia Electrics Ultimate Party Challenge

Participated in the
Nostalgia Electrics Ultimate Party Challenge