Tower Fall

by Innokick

12300

Intro: Tower Fall

This Projet is inspired from the "SOS Oustiti" game. It's an wooden adaptation on the mediaval theme.

The aim is to collect as many pebble as possible. The main difference is that the player has to roll a dice to determine which wooden tongue he is allowed to pull, increasing the fun !

STEP 1:

The first step is to load the file in the laser cutter.

Separate the different pieces (optionnal : apply paint)

Use the hammer to put 3 u-nails, 1 on the front wall + 2 on the door at the basis

Use some tape to attached the front wall and the door from the inside face leaving about 1mm between the door and the front wall for the door to rotate

Assemble the different walls, back pannel then left and right then front pannel with the door

Make a knot on the door nails with the thread and pass it though the front wall loop


Your game is ready to start ! Use the rules to start a new play.

STEP 2: Watch the Video


This video explains how to play Tower Fall, give it a watch and enjoy playing!