Tube Scarf Face Warmer

Intro: Tube Scarf Face Warmer

Using sweat pants with straight legs, cut off hem, measure (I used 20") mark cutting line.

STEP 1: Cut

Cut, fold right sides together, pin

STEP 2: Sew

Sew around, leaving an open bit to turn it right side out. I was using a straight stitch machine so I pulled the fabric a bit to allow it to stretch when done, if I had used a zig zag machine I would have used a wide stitch instead.

STEP 3: Turn

Turn it right side out through the small opening you left, close the opening, turn the tube until that bit is inside.

STEP 4: Wear

Place on head.

Comments

[boydmiles]

Step 4 is the most complex but the photo does help a little. I'll try to be more concise on my next instructable.

[wilgubeast]

I had some trouble with step 4. Good thing the photo is so illustrative.