Turn Off the Lights

This are the steps to make a looping game. Where LED buttons turn on and off at different rates. Its and endless loop that causes the last button to be turn off to restart the off buttons and maintaining that button off for the sequence period. Follow the steps to create your own game.

Materitals

6 LED buttons (click here)

RedBoard

22Gauge wire

Resisters

Breadboard

Soldering

Soldering Breadboard (click here)

Laser Cutter

Wood (soft)

Calipers

Glue

Clampers

Soldering gun

Step 1: Step 1 Make a Box

Laser Cut a Box with the file attached

Step 2: Laser Cut the Holes for Buttons

The data sheet for the LED buttons is attached.

Connect wires to the buttons

Step 3: Soldering Wire

22 gauge wire

Resisters

Soldering

Soldering Breadboard (click here)

Solder your wires that you have in your regular board to the solderable breadboard that will go inside the box. Transfer everything exactly the same with all the wires and resisters.

Step 4: Power

Using a 9v jack connector. Cut it to access the red and black wire and connect it to an on/off switch as shown in one of the images above.

Step 5: Finish Product

After uploading the arduino code into the redboard. Turn on the button and play the game. TurnOfftheLIghts. Since this game is an endless game the only way to TurnOfftheLights is to turn off the power.

(CODE COMING SOON)