Twig Bookshelf

Supplies : 4 or as many shelfs as you want, 1 by 10 boards : screws screw driver : screws :and lots of twigs!

Step 1: Frame

First you take your boards and your long sticks. Take them and screw drive them together as shown in my picture. You need 4 of those long sticks. They need to be strong enough though to hold all the weight. Now when you are screwing them on to the boards make sure you have a little bit at the end of the last board so it can stand on the floor.i also have a picture of that.

Step 2: Finishing Touches

After you have done your frame start putting tiny twigs all over it you just nail it in with tiny tiny nails like the picture I have. I hope you have a fun time reading all those books with that awesome bookshelf to hold it!

Comments

[pfred2]

Looks good. I think it might look nicer if you could countersink the screws and put plugs over them.

[Daemonikk]

Perhaps you could cut a little of the bark off, screw your screws in good and deep, then glue the bark back over the screw head.