Ultra Pistol 2

Intro: Ultra Pistol 2

The best knex pistol, period.

The Ultra Pistol 2 is easier to use, stronger, more reliable, faster firing, has better sights, is equally powerful, ranged, and accurate, and accepts more types of ammo than the original.

It can fire blue, yellow, red, and gray rods (yellow fires the best).

Influences
-DSman's DD-27 Assault Rifle
-Jollex's DD-27 Pistol
-KILLERK's Pistol

NOTICE: The handle is right handed. If you are left handed, build it flipped.

Video: www.youtube.com/watch
Review: https://www.instructables.com/community/Ultra-Pistol-2-Review/

STEP 1: Handle

1: Build three of these.
2: Attach with a blue and gray rod as shown.
3: Build this.
4: Build this.
5: Build this.
6: Attach 3-5.
7: Attach to handle.
8: Build this.
9: Slide in as shown.
10: Wrap a tiny elastic around the blue rods as shown.

STEP 2: Barrel

1-3: Build this (the two black connectors are ball sockets)
4: Build this.
5: Build two of these.
6: Attach the parts from steps 1-5.
7,8: Build this. (the black connector is a ball socket)
9: Attach the two sections together.

STEP 3: Trigger

1: Build this.
2: Build this.
3: Attach 1 and 2.
4: Slide a yellow rod in as shown.
5: Build these.
6: Attach as shown.
7: Cut a green rod in half. (optional)
8: Attach to the orange connector. (optional)

STEP 4: Assembly

1: Build this.
2: Attach the handle, barrel, and trigger together.
3: Read the notes.

STEP 5: Finishing Up

1: Build this. Trim the edges on the tip of the black rod slightly with scissors or a pencil sharpener.
2: Attach one trigger elastic to each side of the gun.
3: Add duct tape to the firing pin pull.
4: Attach a metallic blue connector to firing rod to the noted area. Attach elastics as shown.
5: Gather 4 of these.
6: Attach to the rods at the end of the barrel. (these act like a funnel to make rods easy to load)

STEP 6: Finished!

Please rate.

Comments

[Inventor X]

As you said Oblivitus, The best knex pistol. Period.

[Oblivitus]

Thank you.

[Perk1ns]

If you're using that metallic blue connector to keep the firing pin inside the barrel, wouldn't you need to weaken it, so that the firing pin can still slide easily?

[Perk1ns]

Finished it. Indeed the best k'nex pistol. 5 stars.

[Oblivitus]

Thank you. :)

[Oblivitus]

No.

[ol987986]

this gun is probly the best pisto.l on the site, better than KILLERK's (no offense)
really accurate too

[Oblivitus]

Thanks a ton.

[instruct39]

what kind and how many bands did you use?

[the knexman]

are the ball point sockets male or female?

[bigt4616]

i just figured out the most amazing thing. this gun has great power and distance already... but... take two of those long balloons that you used to blow up with that little pump when you were a little kid, you know, the ones that clowns make animals out of. snip off both sides, tie each side to the other balloon. and tadah. you got a super rubberband. this came purly out of nessessity... and it shot into the woods in my back yard with an odammo yellow rod. i just looked at amazement. my yard is at least a good 80 feet long. i had to do a second one just to make sure i wasnt dreaming XD.

[bigt4616]

okay, maybe a bit too strong, just split a red rod in half that i was using as a pullback O_O

[sukinmaru]

Ok... I finished at 1:32am central time... I think... I think Imma go to bed now....

[sukinmaru]

I deleted my own comment because it was redundant. This doesn't work with #64 elastics! What elastics should I use?!?

[Dr.Squirrel]

I built this for the third time, and a added a fore grip to it. Now it shoots way more percisly.

[H1T4TCH1]

 do u have 2 sharpen it?

[Oblivitus]

I think so.

[bugjojo]

You dont need too. Just rem0ve that piece at the front-inside of the barrrel at first but then only shoot parralel. Put it in if your gun works,

[H1T4TCH1]

ah thanks man

[H1T4TCH1]

 yeah i wanna be sure cuz i dont wanna sharpen or break knex pieces...