Understanding a Janome Embroidery Machine: Setting Fabric in the Hoop and Attaching the Hoop to the Machine

Introduction: Understanding a Janome Embroidery Machine: Setting Fabric in the Hoop and Attaching the Hoop to the Machine

Written by Eva Marie Cooper

I did this at TechShop San Jose!
techshop.ws

The hoop size I am using is a 140mm X 200mm [5.5” X 7.8”].

This is a photo instructional on how to set fabric in the hoop of a Janome Embroidery machine and how to attach the hoop to the embroidery machine. This is a fairly simple procedure and should be pretty easy to figure out! If you have any questions or comments feel free to leave a message below!

Link to Other Instructable:
Understanding a Janome Embroidery Machine: Threading the Machine and the Needle
https://www.instructables.com/id/Understanding-a-Janome-Embroidery-Machine-Threadi/

Be the First to Share

    Recommendations

    • Plywood Challenge

      Plywood Challenge
    • Plastic Contest

      Plastic Contest
    • Battery Powered Contest

      Battery Powered Contest

    Discussions