Upgrade Mantis Claw Install Guide

by SINONING

2.1K82

Intro: Upgrade Mantis Claw Install Guide

this is upgraded mantis claw, we use laser cutting, make it fast and cheap.

you can buy from here

SINONING a shop for diy accessories parts.

STEP 1: Reference Video


upgrade version not fully same with the video, but most same, you can as a reference.

STEP 2: Full Design

STEP 3: List

Product List:

1. A set of acrylic cutting pieces

2. Allen screws M4x14 23

3. Locknuts M4 23

4. Flat head cross 3x30 screw 1

5.m3 ring nut 1

6.M3 lock nut 1

7.m3-m4 small cross sleeve 1

8.m4 Allen wrench 1

STEP 4: Install Single Claw

https://www.sinoning.com/product/upgrade-mantis-claw-acrylic-manipulator-diy-for-quadcopter-drone-snm1900

STEP 5: Install Top

STEP 6: Connect Single Claw to Top

STEP 7: Thank You

please forgive my English not good,

and you can buy the kit in a cheap price from here

SINONING a shop for diy accessories parts.

Comments

ub005836 4 years ago

Hi just wanted to ask what the height for the smaller claw (1.2 mm thickness from the video) is??