Usability Testing on Farberware Soft Grips 3 Can Opener
Intro: Usability Testing on Farberware Soft Grips 3 Can Opener
Let's test our new can opener.
STEP 1: To Begin.
Have a can and your can opener ready.
STEP 2: Be Careful.
Work on a flat surface.
STEP 3: See the Two Wheels?
Look at the design of the can opener.
STEP 4: The Metal Leg Is a Brace.
Place the opener right next to the can.
STEP 5: Opening Larger Cans
Tilt the can opener so the tip of the leg brace touches the can.
STEP 6: Engagement of Larger Cans
Apply steady downward pressure while turning the wheel to engage the can.
STEP 7: Apply Gentle Pressure.
Engage the can and begin to turn.
STEP 8: The Wheels Engage.
Notice the crimping around the edges.
STEP 9: Opener Is Finished.
The opener will slightly disengage.
STEP 10: Gently Lift Up.
The lid will begin to come up.
STEP 11: Time to Eat.
Gently remove the lid.
STEP 12: The Chef Must Clean Up.
Dispose of the lid in a trash receptacle.
2 Comments
DIY Hacks and How Tos 7 years ago
Welcome to Instructables. I hope that you will share more with the community.
SylviaH19 7 years ago
Thank you. It was fun making this.