I never got around to making another instructable, but this is a simple overview. Use the nozzle from another spray can, and drill a hole until it passes through to the end that attaches onto the can. Then glue the adapter nozzle in and seal the original out-the-side nozzle. No leaks on that one.
7 Comments
3 years ago
What happened to the post?
4 years ago
Could i use any pen?
We dont have bic pens here in Thailand
Thanks.
8 years ago on Introduction
nice work, do you have any troubleshooting ways to help fix leaks from the joint to the adaptor?
Reply 5 years ago
use aquarium airline tubing between plastic tube ant valve thats work fine
Reply 5 years ago
I never got around to making another instructable, but this is a simple overview. Use the nozzle from another spray can, and drill a hole until it passes through to the end that attaches onto the can. Then glue the adapter nozzle in and seal the original out-the-side nozzle. No leaks on that one.
Reply 7 years ago on Introduction
Hey, just wanted to say will be making another one with no leaks very soon!
8 years ago
Yes I do
If it's hot glue, use a soldering iron to smooth it out And cover the holes. If epoxy then put more on
Thanks for asking !