Introduction: Vibrator - a Layered Shot
Why do they always give drinks such strange names? I think bartenders just like to make people blush.
Following this instructable, you can make your own layered shot so you won't need to go to the bar and ask for a vibrator.
Step 1: Ingredients
For this shot, you'll need:
- Crème de bananes
- Coconut flavored rum
- Irish cream
You'll also want a shot glass and a spoon (a chilled metal spoon works best for layering).
Step 2: Layer the Shot
Fill a third of the shot glass with the banana liquor.
Hold the spoon against the glass, above the first layer, and slowly pour the Irish cream over the spoon into the shot. You can use a chilled spoon but it is not necessary.
Add the final layer, the coconut rum, to top up the glass.
The different alcohols have different specific gravity measurements, which allow them to float above the other ingredients if added with a careful pour. Even if you add the ingredients in the wrong order, if they do not mix too much when you pour, they will settle in the same three bands.

Participated in the
Makerspace Contest
4 Comments
7 years ago
Man. I'll have to make one of these.
7 years ago
Oh okay! :)
7 years ago
This is one big "shot". But thanks for showing the layers!
Reply 7 years ago
It might look larger in the photos, but the glass I used holds the same volume as a standard shot glass.
All three ingredients are pretty easy to sip, if you don't want to down it all in one go.