Vibrobot
Intro: Vibrobot
This is a very simple Robot. Vibrobot is an extremely simple form of walking robot. It is one of the simplest of all mobile robots, both in its function and its construction.
Materials:
- computer fan
- paper clips
- hot glue
- switch (rock switch)
- Wires
- hard wire
- galvanized plate (about 3 x 5 cm)
- red LED
- 1K ohm resistor
- glue cap (or other cap)
STEP 1: Eyes
Solder two LEDs and resistor like schematic and photos.
STEP 2: Neck
form a hard wire like pic for neck
use a glue cap (or similar) and glue to wire for face
glue LEDs to cap
cut a wire strip and cover the hard wire
STEP 3: Vibrator
use a 12v computer fan as a vibrator
glue a screw (or two screws) to fan blade
STEP 4: Legs
use 6 paper clips and straighten them and form like pics
solder legs to galvanized plate
solder a rock switch to galvanized plate
STEP 5: Soldering
solder LEDs(eyes), Fan, Switch and battery together like picture and schematic
STEP 6: Finishing
complete the robot as you like
3 Comments
jethinha 7 years ago
WATenBrink 7 years ago
Make it slightly bigger and the ladies will love it! :D
Sorry, but when I saw those images, it was the first thing that came into mind. You could have chosen a different nose, though...
thunder_ir 7 years ago
:D
you are right, but I dont find any nose in my office ;)
thanks for idea