Virtually Indestructible Single-Piece Woven Paracord Belt W/ Original Weave
Intro: Virtually Indestructible Single-Piece Woven Paracord Belt W/ Original Weave
Basically the only things that could destroy are either hedge clippers or open flames.
For this project you will need:
1x 100 ft of 7-strand paracord
1x climbing carabiner
Tools:
1x Lighter
1x Straight object (pencil/drumstick/ruler)
1x Old belt (for sizing)
For this project you will need:
1x 100 ft of 7-strand paracord
1x climbing carabiner
Tools:
1x Lighter
1x Straight object (pencil/drumstick/ruler)
1x Old belt (for sizing)
STEP 1: Begin
Step 1:
Match up belts and create three loops.
Match up belts and create three loops.
STEP 2: Preparing the Loops
Step 2:
Create three loop and make sure that they are even by tying them around a straight object. (Shown with drumstick)
Create three loop and make sure that they are even by tying them around a straight object. (Shown with drumstick)
STEP 3: Begin Weaving
Weave as shown in video.
STEP 4: Ending
End the belt by looping cord through end loops.
STEP 5: Seal
Seal the end by lighting on fire and then promptly blowing out.
Enjoy your belt and please vote if you liked this Instructable!
4 Comments
camohat 11 years ago
Johnhall14 10 years ago
quahery 10 years ago
camohat 10 years ago