Introduction: WHEEL BALANCING
Step 1:
Step One
Static
"Wheel Balancing"
Equipment by Snap-On
Step 2:
Step Two
Equipment with
"Counter Balance"
In Place
Step 3:
Step Three
Snap-On
Data Plate
(Enlarged to some degree)
Step 4:
Step Four
Equipment with
"Protractor"
In Place(Divides
Assembly into One-Thirds)
Step 5:
Step Five
Hub & Drum Mounted.
Heavy Spot Marked at
Bottom with Chalk
Step 6:
Step Six
Hub & Drum
Counter Balanced
with 2.75 Ounces
Step 7:
Step Seven
Tire and Wheel Mounted.
Heavy Spot Marked at
Bottom with Chalk
Step 8:
Step Eight
Tire and Wheel
Counter Balanced
with 2.75 Ounces
Step 9:
Step Nine
Hub & Drum, Tire & Wheel
Mounted with Heavy Ends
Opposite Each Other Best
Possible. Note White Chalk
on Drum at Bottom, &
Chalk Mark on the Tire
at Upper Right
Step 10:
Step Ten
Complete Assembly
Mounted Showing
New Heavy Spot at
Right Arrow and
Counter Balanced
with 4 Ounces
Step 11:
Step Eleven
Complete Assembly
with Protractor in Place
Dividing Wheel into
120 Degree Sections.
Note Arrow at Bottom &
Marks at Upper Left
and Upper Right
Step 12:
Step Twelve
Lead Weights
In Place
at 120 Degrees
from
Heavy Spot
Step 13:
Completion
Balancing
Completed