Water Resistant Soft Circuit



Introduction: Water Resistant Soft Circuit

Fused plastic bags with a conductive thread core.

For that special moment when you need a soft circuit that is water resistant.

Want more eTextile How-To DIY eTextile videos, tutorials and projects?
Then visit The eTextile Lounge!

Step 1: Parts

Plastic Bags
Cutting Implements
Conductive thread

Step 2:

Layer plastic bags on top of a piece of paper.
Lay conductive thread trace.
Layer plastic bags.
Lay conductive thread trace.
Repeat until design is complete.

I recommend that:
Two or three layers of plastic separate conductive threads that lie on top of each other.
Total of eight of more layers of plastic.

Step 3: Tips and Tricks

Plastic bags can be full of static so to hold things in place before you iron try a spray glue such as 505 fabric adhesive or you can sew the conductive thread thru the plastic bags.

Step 4: Fuse the Layers Together

Place the plastic bags between two layers of paper.
Using an iron on medium setting firmly press the papers together while constantly moving the iron.
Flip the paper and iron from the other side.

Step 5: Volia!

Once the paper has cooled peel it back from the plastic.

A water resistant soft circuit with minimal increase in conductive thread resistance.

Be the First to Share


    • First Time Author Contest

      First Time Author Contest
    • Make it Move Challenge

      Make it Move Challenge
    • Retro Tech Challenge

      Retro Tech Challenge