Wine Cork Cutting Hack

Introduction: Wine Cork Cutting Hack

About: I work in the mental health field as therapist in a residential treatment program. I also have a duel career in health and wellness doing massage and personal exercise training. My hobbies which spill over in…

Old wine corks have a lot of great uses but can be a pain to work with if you don't have the right tools for cutting them. This simple hack will make natural wine corks much easier to cut with less effort and little-to-no-breaking of the cork.

Step 1: Measurements

Before you boil, use a Sharpie to mark off whatever measurements or cut marks you need. It's better do to this before boiling so that the cork doesn't dry before you can cut it.

Step 2: Boil

Boil the wine corks in water for 15-20 minutes. If the water gets low, add more.

Step 3: Cut

After boiling, one by one, take a cork from the water (leave the rest in the water) and begin slicing or making whatever cuts you need. Cork dries quickly. If the cork is giving too much resistance or looks like it's going to break, it needs more boiling.

Step 4: Safety

Remember to take necessary safety precautions when working with sharp tools. Don't put your hands in front of a blade, don't cut towards you etc. I found working with boiled cork to be a lot easier than when they are dry and I experienced less slippage.

Makerspace Contest 2017

Participated in the
Makerspace Contest 2017

MacGyver Challenge

Participated in the
MacGyver Challenge

Be the First to Share


    • Raspberry Pi Contest

      Raspberry Pi Contest
    • Jewelry Challenge

      Jewelry Challenge
    • Photography Challenge

      Photography Challenge


    Alex in NZ
    Alex in NZ

    4 years ago

    Neat idea. I must try that the next time.