Wood Cup Coaster

By in WorkshopWoodworking

1,512

28

4

Introduction: Wood Cup Coaster

By
About: Hello, my name is Fabio and i'm from Brazil. I love to make things, most in wood but i like others materials too, and i love Beer! ;) Have a channel at YouTube called Wood and Beer. Thanks for all support and.…

I made this cup coaster from Ipe wood, here you can see the video how i did it.

Step 1: CNC

First i made in my CNC Router the big circle and then engrave my logo.

Step 2: Cutting

Next step was cut all sides in the miter saw!

Step 3: Holes

Now i make the holes for brass inserts whit a forstner bit.

Step 4: Sanding

Sanding with 220 grit a then spray some black tint.

Step 5: Brass

Chopping the brass and gluing with super glue

Step 6: Sanding

Sanding the brass in the belt sander with 80 grit, then hole piece with a hand sander in 120, 240 and 320 grit, and finally by hand with 400 grit.

Step 7: Finishing

To finish I used mineral oil.

Step 8: Enjoy

Time to enjoy... CHEERS!

Thank you very much, hope you all like.

Fabio

Be the First to Share

    Recommendations

    3D Printed Flexi Snake
    3D Printed Flexi Snake by Penolopy Bulnick in 3D Printing
    56 11K
    Mobile Folding Craft Station
    Mobile Folding Craft Station by Yvette M in Woodworking
    136 6.7K
    A Minimal Wooden Wall Clock
    A Minimal Wooden Wall Clock by technocraftStudio in Woodworking
    101 9.0K
    Glow in the Dark Molecules
    Glow in the Dark Molecules by mphatsosimbao in 3D Printing
    25 3.2K

    • For the Home Contest

      For the Home Contest

    • Big and Small Contest

      Big and Small Contest

    • Game Design: Student Design Challenge

      Game Design: Student Design Challenge

    4 Comments

    0
    jlepack
    jlepack

    7 years ago

    Looks nice. I like the brass plugs. Wish I could afford a CNC machine.

    0
    Wood_and_Beer
    Wood_and_Beer

    Reply 7 years ago

    Thank you very much, glad you like! ;)