Introduction: Wood and Metal NASA Sign
..because outer space is rad.
Step 1: Materials
8 inch X 24 inch 22 Gauge Sheet Metal
1/2 inch MDF cut to 8 inch X 24 inch
Red Paint
Wood Screws
D Ring Frame Hanger
Step 2: Cut and Paint
Cut NASA letters out of 1/2 inch birch plywood, then paint.
Attachments
Step 3: Drill Work
Drill holes through MDF and sheet metal
Step 4: Spacers
Fasten the aluminum spacers and letters to the sheet metal/MDF.
Step 5: Hang
Fasten the D-Ring Frame Hanger to the MDF and hang!