Wood and Metal NASA Sign
Intro: Wood and Metal NASA Sign
..because outer space is rad.
STEP 1: Materials
8 inch X 24 inch 22 Gauge Sheet Metal
1/2 inch MDF cut to 8 inch X 24 inch
Red Paint
Wood Screws
D Ring Frame Hanger
STEP 2: Cut and Paint
Cut NASA letters out of 1/2 inch birch plywood, then paint.
STEP 3: Drill Work
Drill holes through MDF and sheet metal
STEP 4: Spacers
Fasten the aluminum spacers and letters to the sheet metal/MDF.
STEP 5: Hang
Fasten the D-Ring Frame Hanger to the MDF and hang!
3 Comments
kdp017 7 years ago
Could you be more in-depth with where and how you placed your spacers as well as how you fastened them to the letters. I would love to build one but I dont know much about this sort of thing.
Swansong 7 years ago
This is really cool :) I wish I had a laser cutter!
LEVdisplay 7 years ago
Thanks!