Introduction: Wooden Google Logo

By

Cut three 450 mm pieces off from a planed 125x25 mm board using a miter saw.

Cut it along into 50x25x450 mm work-pieces using a disk saw.

Work one side of each work-piece with a hand router equipped with a DIY tool.

Step 1: Glue the Pieces Together

Put the resulting work-pieces together into what will be a board. Please, match color and fiber direction. Mark the face.

Plane the pieces using a hand planer and put them together.

Glue the pieces together into a single board. Remove excess glue with a damp sponge. Wait until the glue dries.

Process the board on a thickness planer until it is 20 mm thick.

Step 2: Cut Out the Logo

Cut out a circular base for your future logo using a hand router equipped with a compass.

Plane the remaining part of the board until it is 12 mm thick.

Cut out the Google logo using a portable jig saw.

To prepare the parts for painting, sand them manually.

Step 3: Paint

Mark out the piece with a pencil. Paint the Google logo with a brush. Apply the original color pattern.

Google's favicon shows a capital letter "G", in the tailor-made font for the new logo, with segments colored red, yellow, green, and blue.