Wooden Laser Cut IPad 2 Stand
Intro: Wooden Laser Cut IPad 2 Stand
Created using a C02 lasering machine.
STEP 1: Materials
-laser machine + required software
-1 12x24 1/8 thick piece of wood
-CAD software (ex. Autodesk Inventor, AutoCAD)
-sand paper
-wood glue
-clamps
-finish
-1 12x24 1/8 thick piece of wood
-CAD software (ex. Autodesk Inventor, AutoCAD)
-sand paper
-wood glue
-clamps
-finish
STEP 2: The Drawings
Attached is the .dxf files of our drawings that we used in the laser's software.
STEP 3: Lasering
We used a CO2 laser to cut out our pieces.
STEP 4: Assembly
All of the pieces nedded for assembly
*side tabs not shown*
*side tabs not shown*
STEP 5: Glueing
Make sure to sand all pieces before glueing to get rid of burn marks and to give it a nice clean surface for glueing.
Glue all of the pieces together with wood glue.
*We found it best to glue all of the pieces toghether at one time*
Glue all of the pieces together with wood glue.
*We found it best to glue all of the pieces toghether at one time*
STEP 6: Final Product
The final product came out nicely the ipad fits snug and doesnt slide out.
8 Comments
anthonyhtn 1 year ago
danialarthot 9 years ago
ethulley 10 years ago
Thanks
Eddy
patlink72 10 years ago
Mindmapper1 10 years ago
joeymaier 10 years ago
Mindmapper1 10 years ago
jessyratfink 10 years ago