Introduction: Writing Accessory for Netanel
project for fixperts
Step 1:
Step 2:
Step 3:
3D print the following file.
To change size, measure the hand and change in the open file.
Step 4:
Duplicate the 3d model from flexible polyurethane 60 shore.
Step 5:
Print the following shape in real size and cut the neoprene
Step 6:
attach the neoprene on the final model.
Step 7:
Sew the edges of the neoprene on the model.
Step 8:
Print the following shape in real size and cut the neoprene
(can be printed directly on neoprene according to colour).
Attachments
Step 9:
Attach the snap fasteners on the neoprene covered model and on the hand cutout.
Step 10:
Attach the two pieces by snaps and it`s redy for use.