Introduction: Ze Lego Cross Bow
More by the author:
About: I am a lego mindstorms fan and builder. I primarily make lego battlebots, but i also make ball machines.
Hope you like all my stuff!
Hello Everyone!
This is my first instructables. It is on a Lego Cross Bow.
This is an original idea.
This Cross Bow is a nice little weapon. It has a good range of over 20 feet if two dual 64 rubberbands are used.
Sorry if the instructions in the end are vague but i got a robot fight soon.
This is my first instructables. It is on a Lego Cross Bow.
This is an original idea.
This Cross Bow is a nice little weapon. It has a good range of over 20 feet if two dual 64 rubberbands are used.
Sorry if the instructions in the end are vague but i got a robot fight soon.
Step 1: The Bow
Sorry the Instructions are so vague, but it is hard to disassemble.
Step 2: Bottom Barrel + Trigger
Same as last sorry for vagueness.
two parts go together
two parts go together
Step 3: Handle
Follow instructions
Then add by putting in gaps and push in pins
Then add by putting in gaps and push in pins
Step 4: Upper Barrel
Just follow the pictures
Step 5: Stock
Follow
Step 6: Wheel Stand
Optional
Step 7: Ammo
Make as many as you want. This is the best ammo.
Step 8: Final Piecing
Straight forward
Step 9: Rubberband Attachment
Follow pics
Attach one strong and two weaks on trigger and the square.
Attach one strong and two weaks on trigger and the square.
Step 10: Firing
pull back and loop around
load through the front
pull trigger
load through the front
pull trigger
Step 11: Congratulations!
You made LegoBlackSmith's Cross bow. use it to shoot anything you desire.
