Bushmaster M17s
Intro: Bushmaster M17s
hey guys !
this is my bushmaster m17s replica thats like 95% perfect as a replica, and also works really well too.
stats:
up to 60 feet with 3 #28 bands
not very accurate
packs a strong punch
looks awesome
spring loaded curved mag
mag release system
safety 100% reliable
uses a lot of broken parts (though a few can be taken off, if you don't build all the mechanisms)
uses at least 11 hinges, but none are necessary (all are for looks, to resemble the real gun which i replicated)
extremely comfortable and easy to use
short ram pull
hope you guys'll like this as much as i do (and i DO)...
here's a vid of it in action:
my gun
this is my bushmaster m17s replica thats like 95% perfect as a replica, and also works really well too.
stats:
up to 60 feet with 3 #28 bands
not very accurate
packs a strong punch
looks awesome
spring loaded curved mag
mag release system
safety 100% reliable
uses a lot of broken parts (though a few can be taken off, if you don't build all the mechanisms)
uses at least 11 hinges, but none are necessary (all are for looks, to resemble the real gun which i replicated)
extremely comfortable and easy to use
short ram pull
hope you guys'll like this as much as i do (and i DO)...
here's a vid of it in action:
STEP 1: Fore Grip Area
a simple step to get you warmed up...
STEP 2: "scope"
another simple step.
STEP 3: Handle/trigger Area
here it's starting to get tricky...
STEP 4: Barrel
this part is generally a simple pattern with slight differences here and there. notice the differences... they are important.
STEP 5: Stock
this is by far the hardest step, thats why it's saved for last. it contains pretty much all of the guns mechanisms (only one not there is the trigger itself). get this step over with and your done building the parts of the gun.
STEP 6: Assembly and Band Placement
a simple step to end it all up with. to fire (explanation for the newbies), pull back the ram (blue rod in the gap at the back of the stock) until you here 3 clicks (1 - bullet, 2+3 - trigger). then, be careful when you shoot not to rest your face on the ram, and pull the trigger.
STEP 7: Magazine
this is the curved magazine that holds 8 bullet (can be made bigger of course). if you want to make the regular magazine that is the same approximate size and can hold 10 bullets, just build it from the pics in the intro, and from the vid on my SABR v2 note on the v1 'ible.
to learn how to insert the spring (bendy) and the mag pusher, watch this video:
to learn how to insert the spring (bendy) and the mag pusher, watch this video:
48 Comments
Joe2point0 4 months ago
megustatrains 10 years ago
KnexDude786 3 years ago
The Knex Inventor 7 years ago
Nice model! I'll have to make it sometime.
halfeatenham 10 years ago
very nice gun easy to use and every thing works like clock work wish it would shoot further
halfeatenham 10 years ago
pic of the gun
megustatrains 10 years ago
The Red Book of Westmarch 11 years ago
The Red Book of Westmarch 11 years ago
AGH! I wish when people made an 'ible, that they would take a pic of one side of the gun with ALL the internals, so that if somebody wanted to see the internals, they would not have to go though several pics to do it.
Sharir1701 11 years ago
The Red Book of Westmarch 11 years ago
1) Take a picture of one side of the gun,
2) Begin to take pictures of one part of the internals at a time,
3) Once the internals are finished, slap on the other side, and ad the extras.
In this way, you get the same effect, but it is easier to see where your going. Don't bother about wearing a shirt, I was just teasing you. Did I send you a PM...?
Sharir1701 11 years ago
oh alright, i actually wasn't sure, i don't know if it's a taboo or something in other countries. i don't believe i got a PM from you. let me double check... nope.
The Red Book of Westmarch 11 years ago
Sharir1701 11 years ago
The Red Book of Westmarch 11 years ago
Sharir1701 11 years ago
The Red Book of Westmarch 11 years ago
Raz1r Knex Bull3t 12 years ago
Sharir1701 12 years ago
Oblivitus 12 years ago