Online supplies?

Hey guys, question for you guys. Im looking for a good online sotre for electronics parts. Ive looked at a few but it seems i can't find a store that has everything. LED's, resistors, tools, capacitors, etc. Plus the cheaper the better. Anyone have some ideas? EDIT: Can someone also suggest a good size of LED's for general building and work. Thanks

Topic by BraedenNaylor   |  last reply


Power supply

Last time I tried to do my own homemade project I failed utterly, I think mostly because I had no idea what anything was (if you saw my last topic on a distortion petal, you know what I'm talking about). I decided instead to buy a book (Tab Electronics Guide to Understanding Electricity and Electronics by G. Randy Slone) which has projects in it, the first one being a power supply. I haven't started building it yet (waiting until I get back to the city) but I've started looking up parts. The thing is, I can't find a 4400-uF 50-WVdc capacitor anywhere! So my question is, can I just put two 2200-uF 50-WVdc capacitors in parallel to do the job of one of the 4400's? That isn't my only question, just the first which I'll ask later in this thread. Thank you (PS: Has anyone had a problem with using Chrome and entering text into these fields? I had to switch to Firefox to get it to work)

Topic by gohuskies   |  last reply


Supply sources

I want to build my own small "boom box". I want to be able to use it play CD's, usb thumb drives, mini plug aux in etc. Can anyone suggest a source for the components for such a project?

Topic by vinstruct3   |  last reply


Power Supply

With this circuit, does it matter how many amps the input is rated at? The output is supposed to be 2 amps at 9 volts

Topic by TheLostAmish   |  last reply


LED power supply?

I need some insight on powering 2 separate circuits. Here's what I have so far...... Circuit #1.   80 3.3v  leds consuming 400MA. Circuit #2.   20 2.0v leds consuming 60MA. Now my power supply output is 15v - 600ma, will this power supply suffice wired parallel? I do have a 9v-1a power supply too that could power circuit #2 if need be. but for simplicity of things i would like to use one power supply.

Question by ARGMISTER   |  last reply


power supply cooling

Normally I'm pretty good with electronics, but I need some help with this problem. I'm building a power supply for a cnc machine and I need help designing a circuit to power fans when it's over a certain temperature. Here's some things it needs: 1) 12 volts supply (easy with a transformer and filtering it) 2) power fans when it reaches a certain temperature. 3) still keeps the fans on even though the rest of the system is off. 4) after the system if off and it's down to temperature then the transformer turns off, to save electricity and to not make it hot after a long time. If possible can someone draw up a schematic? Thanks in advance!

Topic by guyfrom7up   |  last reply


6V power supply Answered

HEY! I recently took out a 6V DC motor from a CD player. The problem is that I wanted it to power through the mains but have a 12V step  down transformer. So, my question is that whether there is any way  I can  power it?  (except by using a 6v step down transformer) Thank You

Question by pranjal12   |  last reply


PC Power Supply? Answered

Hi Guys! I need some help. I recently got several pc power supplies and I don't know how to turn them on. That sounds stupid, but I don't really work with them much. I tried plugging it in expecting the fan to at least turn on, but nothing happened. No outputs from any of the leads either. What am I doing wrong? Thanks!

Question by transistorguy   |  last reply


Computer Power Supply?

Can i use a 20+4 pin power supply on a 24 pin motherboard? THANKZ!!!!

Question by sci4me   |  last reply


Power supply cooling

I'm building a power supply for my cnc machine that gives off about 37volts at 8 amps, and 12 volts at 0.9 amps. All of the transformers are from radioshack (using 6 heavy duty, 25.2volts, 2 amps transformers, 4 in parallel giving off 25.2 vdc at 8 amps, and 2 12.6 volts in parallel. Together in series gives about 37 volts at 8 amps. using 1 25.2 volts 450mA transformer, center tapped) My case does not have enough room for proper cooling such as fans. My case is water tight though, should I fill it up with something like mineral oil to keep the transformers cool?

Topic by guyfrom7up   |  last reply


power supply help

Hey I need help building a pedal brick power supply like the one here. i could just buy one but it wouldent be as fun, and i would rather build one if any one can help or knows of a schematic with multiple 9 volt outs i would appreciate your help.

Topic by chrischavez   |  last reply


Power Supply Question? Answered

I want to build a switching Power Supply, without the use of IC's with everything already inside. I only want to use op amps and passive components. Below are my goals on what to achieve. I would like to make this PSU current limited, or at least shut off when the current goes too high. I basically took the concept of the linear voltage regulator and expanded on it, turning it into a 'proof of concept' switchmode supply. Input Voltage range: . . . .7-24 Volts Voltage: . . . . . . . . . . . . . . 5-24 Volts Max Current: . . . . . . . . . .10 Amps Price: . . . . . . . . . . . . . . . . $5 -- $10         Instead of feeding a voltage reference into an op amp, I modulated it with a few components. (A triangle wave generator, and a array of resistors to lower the amplitude and introduce a DC bias.) The DC bias is controlled by the current protection module, which is simply an op-amp that reads the voltage on a small resistor and multiplies it by 5. This finalized current controlled, DC reference biased triangle wave is fed into a comparator, which will then switch a rather large MOSFET on and off at about 200 Hz, with varying PWM, depending on how much 'droop' there is on the output. Here is a rundown of what the components will do: OK, I refined my plan to this general specs: Input Voltage range: . . . .7-24 Volts Voltage: . . . . . . . . . . . . . . 5-12 Volts Max Current: . . . . . . . . . .10 Amps Price: . . . . . . . . . . . . . . . . $5 -- $10        I basically took the concept of the linear voltage regulator and expanded on it, turning it into a 'proof of concept' switchmode supply. I don't want to use any prebuilt chips where you have a magic black box with inductors, capacitors and resistors connected to it. I want this to be entirely raw, basic, cheap parts. Maybe later, I will replace many of the op amps with a single programmable chip (like an Atmega328P)         Instead of feeding a voltage reference into an op amp, I modulated it with a few components. (A triangle wave generator, and a array of resistors to lower the amplitude and introduce a DC bias.) The DC bias is controlled by the current protection module, which is simply an op-amp that reads the voltage on a small resistor and multiplies it by 5. This finalized current controlled, DC reference biased triangle wave is fed into a comparator, which will then switch a rather large MOSFET on and off at about 200 Hz, with varying PWM, depending on how much 'droop' there is on the output. Here is a rundown of what the components will do: Green field: This contains a voltage regulator which acts as both a 5V power source and a voltage reference. Not only will this module produce a 5V output, but also produce a triangle wave. Blue field: This module will be fed the triangle wave, decrease it's amplitude, and inject it with a bias voltage, controled by the current limiter (red field). Red field: This basic module simply measures current flowing through a 0.1 Ω resistor, and multiply that reading by a factor of 10, and inert it (the circuitry is probably wrong, and I am not sure how this will work, if it even will do what I want it to Will this work?) Yellow field: The final modulated triangle wave is then fed into the last comparator, which will switch a MOSFET on and off at a fixed frequency of 200Hz. The output of this last comparator is now PWM. As the output voltage sags, the pulse width will increase, and cause the final voltage to stabilize at either the peak value of the triangle wave (with little to no load), or near the bottom end of the wave (with a heavy load) ------------------------------------------------------------------------------------------------------------------------------------ My questions:  I try to run this in LTspice simulator but some reason the output of the last comparator is a distorted triangle wave. I think this has to do with my filtering capacitor and MOSFET gate capacitance. Can anyone give suggestions about this design?  I'm sure the current limiting function is not going to work as intended until I finalize it's design (I hope I don't need more than 4 op amps altogether, It would be nice to use a single chip I already have) Any suggestions? I might just omit this part entirely, as it is not necessary.

Question by -max-   |  last reply


Power Supply and Driver? Answered

I've seen alot of the projects that have a power supply and a driver?  What's the difference between the two and why would you need both?

Question by lford4   |  last reply


Power Supply and LEDs

Just wondering what i could do with my old computer power supply? THANKS.... Also...What bout LEDs ....what can i make with them??? THANKS

Topic by Shadown92   |  last reply


atx power supply? Answered

I 'accidentally' loaded the atx power supply with 10 amps. It is requires 4 amps to work, I am worried that the protection circuits will be blown. Would it be safe to use now with a 4 amp supply now? I live in the U.K.

Question by knektek   |  last reply


power supply for LED's? Answered

I have a strip of LED's that have a warning that's says use only with a 12v class 2 power supply. Is this referring to an AC/DC transformer? Should I be able to run them straight from a 12v battery? If I am using a 12v battery is the class 2 circuitry still needed?

Question by MDheliMech   |  last reply


Gateway Power Supplies?

I have a Gateway 24" LCD monitor, model # LP2407, with a bad power supply. Does anyone know where I can purchase parts for Gateway products? Or does anyone know the company that produces the monitors for Gateway? Gateway is useless, they directed me to companies that are resellers or Gateway's computers. I've checked with several local repair shops, all said, "Good luck, buy a new monitor."

Question by    |  last reply


Variable power supply? Answered

Is there a fairly simple circuit, method to making a desktop power supply running on 240v a.c mains supply with a user controlled variable output say 0-24v D.C with variable ampage upto say 1 amp. I may be over simplicating thing in my head but is it just a case of a transformer taking my mains input down to the upper most requirement ( 24v @ 1amp ) on the output, and the using some type of variable resitors on the output to further restrict the output to my requirement. I would be grateful for any guidance and information on this topic. Thanks to the community in advance.

Question by mickcaulton   |  last reply


Supplying amperes on fan? Answered

Hey, I'm just wondering if I were to plug in two fans rated at 12V .1A to a 12V 1A power supply, would the extra .80A will overload out the fans? Or will the fans only draw what it will need? And for other simple devices like LEDs, will this apply?

Question by BIO Wolf   |  last reply


LED Power supply?

I have approx 200 flashing LED circut boards that I want to make a twinkling display from. Each board has a single LED that flashes about every second, each board also has a single 3v cr2032 lithium battery powering it. What Id like to do is remove the battery on each one and wire them to a DC power supply that can be plugged into 120VAC. So I actually have two questions: Should I wire these in series? Or parallel? What size power supply would I need? Heres a link to a picture of what I have. http://www.rocketproduction.com/wirefree-leds.php Thanks (in advance) for all your help!

Question by McBeeRob   |  last reply


PSU Power Supply

I built a PSU bench power supply, but it isnt outputing the right voltages. It just out 5v for all lines(12v,5v). It has a purple wire that is said to be the stand-by, but the psu wont start unless it is connected to the 12v or 5v line. It also says that you have to have the brown sense wire attached to the 3v wire but this seems to do nothing. How can I make this thing output the right power(12v @ 22A, 5v @ 50A)?

Topic by tylerb   |  last reply


Help with my supplies? Answered

I have 2 units of 4" woofers of 4 Ohms and 25 watt RMS with a frequency response of 40Hz ~ 170Hz 2 Units of 3'' loudspeakers  4 Ohms and 10 Watts RMS with a frequency response of 160Hz ~ 20Khz and these tweeters  Can I make a 3way Speakers with these supplies and if yes please send me the crossover and L Pad schematics. Thanks In Advance

Question by adarshnarsaria   |  last reply


motors , and AC supply ! Answered

 hi  , my question is what  would happen if i connected a simple motor ( 3v ) to an AC power supply of the same volt ? will the motor keep turning in both directions right and left .. and so on ? if yes , how can i convert a 3v DC to AC ? and how to control the speed ? coz i need an idea to make a power circuit that can make a simple motor do so (turn right and left and right and left and so on ..... in a controllable speed ) , can you help me?

Question by lu2a   |  last reply


Are these power supplies good?

The cheap bare metal power supplies from ebay or other sides have been reviewed many times on youtube and people have found that they are actually decent. But I cannot find any reviews of the sealed plastic kind of power supplies. The "bare metal" ones I am talking about look like this, and the "sealed plastic" ones look like this and this. Edit: None of your replies answer my question. I am not asking which one I should choose, I am asking if the plastic ones are just as decent as the metal ones. There are a few reviews of the metal ones, and people have found that they are actually quite decent. Here are some: https://www.youtube.com/watch?v=vwFrP7uK5lM https://www.youtube.com/watch?v=71NWT5vrbk8 But I cannot find any reviews of the plastic ones, so I don't know if they are just as good. I am asking if anyone has gotten any of these and made a review with some tests, or knows of a review of these.

Question by poiihy   |  last reply


simple power supply

I have a project that needs a 24VDC input, at only about 300 mA. I don't have any 24V power supplies, wall warts or anything else lying around, but what I do have is a 120 in, 24 out transformer, a bridge rectifier, and a large cap. Is there any reason why I shouldn't just use those? I'll put a fuse on it. I have some 317 voltage regulators but they dissipate too much to provide the full 24V. 317s are short-protected and the like, which obviously my little kludge wouldn't be, but beyond that, is it a bad idea? thanks,

Topic by deadbilly   |  last reply


Led Power Supply?

 I am going mad over trying to figure out what power supply I need. I am making an arduino controlled aquarium fixture and plan on using 30x3w leds. From what I understand using resistors could cause fire and I don't want that of course. I like the look of laptop drivers like this one http://www.gapsupply.com/LED-Power-Supply-p/12v-dc-nwp-96w.htm but I cant figure out which one I need. I have seen all the instructables for this and everyone seems to tape 8 meanwell drivers together. I dont want a big bulky ugly mess like that just one power supply to do the job. The smaller and more compact the better. I will be running 2 rows of white on the outside and one row of red in the middle. 10x3w leds per row. each row individually dimmable via ir and tft. here is the led specs. Whites: http://www.ebay.com/itm/390908787444?_trksid=p2059210.m2749.l2649&ssPageName;=STRK%3AMEBIDX%3AIT Forward Voltage: 3.2-3.8V-700MA Luminous flux: 200-230LM Output power: 3w Light Color:  White 6000-6500K View angle: 120-140 LED support:Copper Life time:50000 hours Reds: http://www.ebay.com/itm/310834616296?_trksid=p2059210.m2749.l2649&var;=610229587957&ssPageName;=STRK%3AMEBIDX%3AIT DC Forward Voltage:2.2V~2.8V Forward Current: 600-700mA Output power: 3w Light Color:  White 6000-6500K View angle: 120-140 Any help and ideas is greatly appreciated. Thanks

Question by charles.terhune 


Power supply recommendation

I've been trying to collect info and guidance on how to build a portable and minimalistic power supply. I have in the past built other stomp boxes and small amplifiers (PCB kits) but never enough to learn how to read schematics or build from scratch, so I'm looking for something pretty detailed or simple enough. List of the technical and practical requirements: -Steady and safe current output for several hours straight; -Operating voltage: 3-4 to 15-17 volts; -Current: 2-3A; -1 voltage control potentiometer; -1 digital voltmeter; -1 output (1/4 jack); -1 pedal switch input (1/4 jack); -1 status LED; - Possibly external transformer (to keep it smaller and avoid overheating); -No vent holes; I have found similar builds (instuctables and YouTube), but never similar enough to be sure that putting that build in a smaller and sealed box would perform well and not overheat It seems weird to me that I wasn't able to find any kit or project for such a simple build. Below a link to an ideal result example https://thelondontattooconvention.com/suppliers/hard-craft-company-handmade-tattoo-power-supplies/

Question by circuitcircus   |  last reply


Problems with power supplies.

I made a small circuit board which is a proximity sensor that turns on or off a small philips genie light(its a small white tubelight like light ).i tried powering it up with a 9v battery and it works fine and the relay on the circuit board switches the ac220v load and the light goes on ,however when i try powering it up with a 10vdc adapter the relay on the circuit board keeps clicking(here i have not used the ac load to switch the tubelight,i was just experimenting and came upon the problem) .what should i do .pls help me.  

Question by Strontium   |  last reply


Flash Power Supplies

I don't have a lot of money to spend on stuff at the moment. What I do have is flash guns. Four of them in fact, three of which can be fired with triggers. Now I could invest in 16 rechargeable batteries. Or should that be 32 in case I run out? And a crap load of chargers.  And extensions cos we have no spare sockets in our house. But that just doesn't seem right to me.   Heres what I propose : 1) make some dummy batteries from wood with wire running through the middle.   Three of these go in each flash to carry the connections  2) a fourth dummy battery carries wires out of a small notch in the battery flap door 3) said wires are connected in parallel to a large rechargeable battery - I reckon a 6v from an old British motorcycle (fast draining) or from a granny wagon (deep cycle) should do the trick.  4) when I'm done shooting I charge this single battery from the mains charger I have (does 6/12v) I figure 4xAA batteries at 1.5v = a 6v battery, bu extra size should last longer, be more convenient than carrying around dozens of AAs and changing them and if I want to use AAs when our and about I still can   Any reasons tho wouldn't work or I shouldn't do it?

Topic by ohowson   |  last reply


transformer less power supply?

I needed around 500mA current to run my mini project, so i decided to go through the transformer less power supply instead of normal transformer used supply.Since the other power supplies are quite bulky. But the problem occurred is, the supply doesn't supplies minimal current to run the project. Please, help me with this problem and suggest some alternatives or amendments to be made.  I have uploaded a picture of my design.

Question by ShuvamP   |  last reply


Questions on the Building the Power Supply

Does the wall wart need to be AC or DC. Also how does the potentiometer go in the circuit? I bought a 10k volume potiemter here:[http://www.radioshack.com/product/index.jsp?productId=3064080] Will this work?

Question by jfrazi10   |  last reply


ATX Power Supply Conversion

Hi Again, My question is when building an ATX power supply, Can you join the 12 volt leads with the 5 volts leads to make 17 volts? If not how can I get lets say 20 volts. I am going to use a DC to DC converter to make a variable power supply. I would like at least 20V in then I can adjust from 1.2 to 60 volts out. I use it now running directly off battery but would like to add it to the ATX build case. Thanks for any help again.

Topic by Shorty954   |  last reply


ATX power supply conversion

I know this is a long passed DIY. But while building a ATX Power supply I separated all the wires as stated. I then put the green and a black wire to a switch and added the 3 brown leads to the orange leads. When I plug in the unit the supply light comes on, but when I turn the green wire switch the main power LED goes out and no fan comes on. It acts like the switch is shutting the unit off.  Can anyone help. I am 60 years old and just getting into doing some bench work to pass the time. Thanks for any help.

Topic by Shorty954   |  last reply


15 volt power supply help Answered

I need a 15 volt power supply. is there any other circuit than using a 7815 and two batteries?

Question by metsfan1938   |  last reply


48 volt power supply

Hello everyone. i am interested in building a power supply from 0-48 volts and able to push a good amount of amps. any one have a ruff idea on how to beable to adjust the voltage and not limit my current to 2 amps i would like to puch say 15-20 amps. i can build the rectifier i have a 600v i think 30 amp bridge rectifier. just not sure on how to do the adjusting without useing a regulator chip that only pushes a few amps. any help would be greatly appreciated.

Topic by omnacron   |  last reply


how to give power supply to a speaker?

I have spekers of an old radio in working condition...but to use it as my laptop speakers i need a power supply....so what would be its voltage, current and power ratings and how could i make it??

Question by navinn_11   |  last reply


high current adjustable power supply? Answered

I want to run my ps2 in car, Any circuit to drop 12v to 8.5V at 6amps the lm317 circuit is not powerful enough

Question by ARJOON   |  last reply


12v 20-30a power supply

Good day yall, i want to make a simple power supply to power up car amplifier, i have a transformer the trans former and is working with the kbu 606 diode, what type of regulator would be best to use and how much would i need, and if you have a diagram of something simple that can be adjusted then that would be great, thank yow

Topic by WIZZIEDEE   |  last reply


transformerless ac to dc power supply conversion?

Input of AC supply is 24v  output wanted from in DC of 2.5amp Without using transformer. please help.

Question by snehap22   |  last reply


I want to build a multi-voltage power supply?

I want to either build or buy a multi voltage power supply.  One that will deliver 12V to one device while simultaneously supplying 6V to another.  Any suggestions on where to go?

Question by SpoonGouge   |  last reply


how to make a 12 v regulated power supply?

I want to make a 12v power supply.the input voltage is 220v\50hertz.please guide me with full and complete construcyion and making of power supply along with the equipments and their configurations.                                                                                                                                                                                                                                               thankz.

Question by hashmi43   |  last reply


What is does 200 mA stand for on a power supply?

I am trying to figure out the amps on a power supply. It has an input of 120v, 60 Hz, 4w. Output is 6VDC, 200mA. I just don't know what the mA is.

Question by bbierbaum   |  last reply


i need to build a tattoo gun power supply?

I have a real tattoo gun but i dont have enough money to buy the power supply so im trying to buil one . Does anybody know how? or is it even possible to do

Question by    |  last reply



How to reduce the voltage of a laptop power supply without reducing amperage? Answered

Hi guys, I have a laptop power supply with an output of 19V, 5.6A. I want to use it to power a small stereo amplifier that needs 12V. I want to make an adapter or something that will reduce the voltage without affecting amperage for use with the small amplifier, but I also need it supplying 19V for the laptop. Is it possible to make do it this way: [19V power brick] --> [adapter/transformer] --> [amplifier]?

Question by Tristan GianP   |  last reply


power supply voltage reduction 9v input to two 3v outputs

Hello all ! I'm new to instructables and I’ve found some cool and helpful information for my projects. I need a bit of help designing a power supply voltage reduction device. One that accepts 9v input and output into two 3v 5mA outputs. I want to replace the batteries in a/b Boss selector with a more reliable source of power.

Topic by testpartner   |  last reply


can I use a 10k pot instead of a 5k pot in my power supply?

Its a o to 24vdc power supply . it calls for a 5k pot. want to know if i can use a 10k pot . and what will be the diffrents

Question by mojomojo99   |  last reply


Will you please help me to design a power supply of 12v and 1amp with calculations for selection of right components ?

           As above mentioned i would like to have the basic knowledge regarding the designing power supply. Here i want the selection criteria for all components of power supply .I would like to have basics of the calculations or formula regarding selection of values of capacitors used in design.          Kindly help me please!!!!

Question by Anuja Sham Londhe   |  last reply


where can I find a power supply which has a 12 volts and 3 amperes output?

I am looking for a simple circuit diagram and the name of the devices to be bought

Question by belovebluesky   |  last reply


How to make a regulated power supply with 1.5, 3, 4.5, 6, 9, and 12 volts dc output?

Kindly, please give also the schematic and block diagram and the parts to be used with PCB design. Thank you very much!

Question by ymx   |  last reply