help with a connection? Answered

Does any one know how to connect a web cam to a crt monitor without a computer  or a VGA camera to a crt monitor

Question by techxpert   |  last reply

Ground connection?


Question by rzigmu   |  last reply

wiimote connection?

I am trying to connect a wiimote to pc. i have a dealextreame $1.80 blutooth adapter. i have bluesolei and widcomm drivers installed. the pc is not recognizing my wiimote. any help is very appreciated. 

Question by Krayzi99 

Phone connection Answered

I tried entering some codes to try to connect my samsung t301g to my mac. The phone didn't do much. I wasn't sure if I am supposed to enter the codes in the main menu. The link shows the codes that should work.

Question by jbaker22   |  last reply

Connecting a USB?

How would you connect the wires from a USB (female) with wires that are red, black, green, and white, to a 5V boost regulator that only had three legs - Vin, Ground, Vout?  It's not for a computer so I don't think we need the green and white wires, but I could be wrong.  Which wire goes where?  Thanks!

Question by mckywer   |  last reply

Wireless connection

I have an old iPod touch that I can hook up to my tv I was wondering how can I use that  To connect my new iPod touch to my tv wirelessly  like I want to old iPod to be the receiver  then I would tv out that on to my tv any suggestions thanks in advanced .

Topic by Darki34   |  last reply


i wonder if an institution has a server what does it mean? - They have their own internet connection or who do they pay for at the end of the month? i have a modem that uses sim card let us call the mobile service providers that i use (xy). can anyone explain to me do the data connection i get come directly from (xy) servers or do i get it from somewhere else. and if( no where does it come from)if yes(who are they answerable to at the end of the month.****am a dummy i know so i dont expect am a dummy as an answer. pls anwer in a simple language

Question by mauricewarebee   |  last reply

Connect a Sketch Answered

This is a People counter, well hope to be if working.ha. Lazer across a doorway hitting a LDR. The 4 digit 7 seg display counting up 1 each time a person breaks the beam.  As of now i  have a counting sketch from the Sparkfun example. It is counting up 0 to 999 and at the same time i have an LDR reading to the serial monitor and blinking the LED on pin 13. But they are not "interacting". I am trying to get the beam breakes from the LDR to advance the count by 1 every time it is broken. In the loop function is the mills that was advancing the counting. I have changed it to   displayNumber(counter).  Among other things.But i haven't been successful in having the LDR advance the count. The sketch is still missing some "stuff". What could i change to have the counter advance by 1 every time the lazer beam is broken?    Thanks W /* 6-13-2011 Spark Fun Electronics 2011 Nathan Seidle This code is public domain but you buy me a beer if you use this and we meet someday (Beerware license). 4 digit 7 segment display: Datasheet: This is an example of how to drive a 7 segment LED display from an ATmega without the use of current limiting resistors. This technique is very common but requires some knowledge of electronics - you do run the risk of dumping too much current through the segments and burning out parts of the display. If you use the stock code you should be ok, but be careful editing the brightness values. This code should work with all colors (red, blue, yellow, green) but the brightness will vary from one color to the next because the forward voltage drop of each color is different. This code was written and calibrated for the red color. This code will work with most Arduinos but you may want to re-route some of the pins. 7 segments 4 digits 1 colon = 12 pins required for full control */ #define ldrPin A2    // pin used for input (analog)    int digit1 = 11; //PWM Display pin 1 int digit2 = 10; //PWM Display pin 2 int digit3 = 9; //PWM Display pin 6 int digit4 = 6; //PWM Display pin 8 //Pin mapping from Arduino to the ATmega DIP28 if you need it // //int ldrPin = A2; int segA = A1; //Display pin 14 int segB = 3; //Display pin 16 int segC = 4; //Display pin 13 int segD = 5; //Display pin 3 int segE = A0; //Display pin 5 int segF = 7; //Display pin 11 int segG = 8; //Display pin 15 int ldr_pinValue; int counter; int currState; int then; //int ldrpread; //int digit[4]; //int leftover; int LDR = A2;                                //analog pin to which LDR is connected, here we set it to 0 so it means A0 int LDRValue = 0;                    //that’s a variable to store LDR values int light_sensitivity = 500;  //This is the approx value of light surrounding your LDR //int digit_to_show = 0; int ldr_Pin = 0;  // LED status (0 = low, 1 = high) int inVal = 0;    // variable used to store state of input int switchOn = 725;   // value at which we switch LED on int switchOff = 550;  // value at which we switch LED off void setup() {         {     Serial.begin(9600);            //start the serial monitor with 9600 buad     pinMode(13, OUTPUT);     //we mostly use13 because there is already a built in yellow LED in arduino which shows output when 13 pin is enabled   }       pinMode(ldr_Pin, INPUT );    pinMode(segA, OUTPUT);   pinMode(segB, OUTPUT);   pinMode(segC, OUTPUT);   pinMode(segD, OUTPUT);   pinMode(segE, OUTPUT);   pinMode(segF, OUTPUT);   pinMode(segG, OUTPUT);   pinMode(digit1, OUTPUT);   pinMode(digit2, OUTPUT);   pinMode(digit3, OUTPUT);   pinMode(digit4, OUTPUT);     pinMode(13, OUTPUT); } void loop(){ {     LDRValue = analogRead(LDR);          //reads the ldr’s value through LDR which we have set to Analog input 0 “A0″     Serial.println(LDRValue);                  //prints the LDR values to serial monitor     delay(5);                                                //This is the speed by which LDR sends value to arduino     if (LDRValue < light_sensitivity)       {         digitalWrite(13, HIGH);       }     else       {         digitalWrite(13, LOW); {    if (currState() >  300) then         currState = HIGH    } else     currState = LOW //endif if currState != prevState and currState == LOW then // LOW or HIGH depending on the circuit     counter++     prevState = currState endif      //long startTime = millis();   displayNumber(counter);     //while( (millis() - startTime) < 2000) {   //displayNumber(1217);   //}   //delay(1000);    } //Given a number, we display 10:22 //After running through the 4 numbers, the display is left turned off //Display brightness //Each digit is on for a certain amount of microseconds //Then it is off until we have reached a total of 20ms for the function call //Let's assume each digit is on for 1000us //Each digit is on for 1ms, there are 4 digits, so the display is off for 16ms. //That's a ratio of 1ms to 16ms or 6.25% on time (PWM). //Let's define a variable called brightness that varies from: //5000 blindingly bright (15.7mA current draw per digit) //2000 shockingly bright (11.4mA current draw per digit) //1000 pretty bright (5.9mA) //500 normal (3mA) //200 dim but readable (1.4mA) //50 dim but readable (0.56mA) //5 dim but readable (0.31mA) //1 dim but readable in dark (0.28mA) void displayNumber(int toDisplay) { #define DISPLAY_BRIGHTNESS  500 #define DIGIT_ON  HIGH #define DIGIT_OFF  LOW   long beginTime = millis();   for(int digit = 4 ; digit > 0 ; digit--) {     //Turn on a digit for a short amount of time     switch(digit) {     case 1:       digitalWrite(digit1, DIGIT_ON);       break;     case 2:       digitalWrite(digit2, DIGIT_ON);       break;     case 3:       digitalWrite(digit3, DIGIT_ON);       break;     case 4:       digitalWrite(digit4, DIGIT_ON);       break;     }     //Turn on the right segments for this digit     lightNumber(toDisplay % 10);     toDisplay /= 10;     delayMicroseconds(DISPLAY_BRIGHTNESS);     //Display digit for fraction of a second (1us to 5000us, 500 is pretty good)     //Turn off all segments     lightNumber(10);     //Turn off all digits     digitalWrite(digit1, DIGIT_OFF);     digitalWrite(digit2, DIGIT_OFF);     digitalWrite(digit3, DIGIT_OFF);     digitalWrite(digit4, DIGIT_OFF);   }   while( (millis() - beginTime) < 10) ;   //Wait for 20ms to pass before we paint the display again } //Given a number, turns on those segments //If number == 10, then turn off number void lightNumber(int numberToDisplay) { #define SEGMENT_ON  LOW #define SEGMENT_OFF HIGH   switch (numberToDisplay){   case 0:     digitalWrite(segA, SEGMENT_ON);     digitalWrite(segB, SEGMENT_ON);     digitalWrite(segC, SEGMENT_ON);     digitalWrite(segD, SEGMENT_ON);     digitalWrite(segE, SEGMENT_ON);     digitalWrite(segF, SEGMENT_ON);     digitalWrite(segG, SEGMENT_OFF);     break;   case 1:     digitalWrite(segA, SEGMENT_OFF);     digitalWrite(segB, SEGMENT_ON);     digitalWrite(segC, SEGMENT_ON);     digitalWrite(segD, SEGMENT_OFF);     digitalWrite(segE, SEGMENT_OFF);     digitalWrite(segF, SEGMENT_OFF);     digitalWrite(segG, SEGMENT_OFF);     break;   case 2:     digitalWrite(segA, SEGMENT_ON);     digitalWrite(segB, SEGMENT_ON);     digitalWrite(segC, SEGMENT_OFF);     digitalWrite(segD, SEGMENT_ON);     digitalWrite(segE, SEGMENT_ON);     digitalWrite(segF, SEGMENT_OFF);     digitalWrite(segG, SEGMENT_ON);     break;   case 3:     digitalWrite(segA, SEGMENT_ON);     digitalWrite(segB, SEGMENT_ON);     digitalWrite(segC, SEGMENT_ON);     digitalWrite(segD, SEGMENT_ON);     digitalWrite(segE, SEGMENT_OFF);     digitalWrite(segF, SEGMENT_OFF);     digitalWrite(segG, SEGMENT_ON);     break;   case 4:     digitalWrite(segA, SEGMENT_OFF);     digitalWrite(segB, SEGMENT_ON);     digitalWrite(segC, SEGMENT_ON);     digitalWrite(segD, SEGMENT_OFF);     digitalWrite(segE, SEGMENT_OFF);     digitalWrite(segF, SEGMENT_ON);     digitalWrite(segG, SEGMENT_ON);     break;   case 5:     digitalWrite(segA, SEGMENT_ON);     digitalWrite(segB, SEGMENT_OFF);     digitalWrite(segC, SEGMENT_ON);     digitalWrite(segD, SEGMENT_ON);     digitalWrite(segE, SEGMENT_OFF);     digitalWrite(segF, SEGMENT_ON);     digitalWrite(segG, SEGMENT_ON);     break;   case 6:     digitalWrite(segA, SEGMENT_ON);     digitalWrite(segB, SEGMENT_OFF);     digitalWrite(segC, SEGMENT_ON);     digitalWrite(segD, SEGMENT_ON);     digitalWrite(segE, SEGMENT_ON);     digitalWrite(segF, SEGMENT_ON);     digitalWrite(segG, SEGMENT_ON);     break;   case 7:     digitalWrite(segA, SEGMENT_ON);     digitalWrite(segB, SEGMENT_ON);     digitalWrite(segC, SEGMENT_ON);     digitalWrite(segD, SEGMENT_OFF);     digitalWrite(segE, SEGMENT_OFF);     digitalWrite(segF, SEGMENT_OFF);     digitalWrite(segG, SEGMENT_OFF);     break;   case 8:     digitalWrite(segA, SEGMENT_ON);     digitalWrite(segB, SEGMENT_ON);     digitalWrite(segC, SEGMENT_ON);     digitalWrite(segD, SEGMENT_ON);     digitalWrite(segE, SEGMENT_ON);     digitalWrite(segF, SEGMENT_ON);     digitalWrite(segG, SEGMENT_ON);     break;   case 9:     digitalWrite(segA, SEGMENT_ON);     digitalWrite(segB, SEGMENT_ON);     digitalWrite(segC, SEGMENT_ON);     digitalWrite(segD, SEGMENT_ON);     digitalWrite(segE, SEGMENT_OFF);     digitalWrite(segF, SEGMENT_ON);     digitalWrite(segG, SEGMENT_ON);     break;   case 10:     digitalWrite(segA, SEGMENT_OFF);     digitalWrite(segB, SEGMENT_OFF);     digitalWrite(segC, SEGMENT_OFF);     digitalWrite(segD, SEGMENT_OFF);     digitalWrite(segE, SEGMENT_OFF);     digitalWrite(segF, SEGMENT_OFF);     digitalWrite(segG, SEGMENT_OFF);     break;   } }

Question by WWC   |  last reply


 Please i am really looking forward to an appropriate answer. The main concept behind my question is that: The internet usb is attached to a single computer , other computers should be allowed to access data and as well as internet throw the computer to which the broadband USB is attached.

Question by pizzadox747   |  last reply

Bluetooth dongle connecting to another bluetooth dongle?

Hello, I'm working on a project that requires bluetooth connectivity between two  devices over 3.5mm ports. I was planning on ordering this transmitter and pairing that with this dongle question is will these two pair with each other of would i have to get something like an arduino with a bluetooth transceiver?  I need to use the transmitter but i can replace the receiver if needed. 

Topic by MRCmegarallycar   |  last reply

Connect PC to old(ish) Projector: Connection

Hey, I got an old projector from my school from my school recently, that has a video in, and i have managed to make it wok with my DVD player. My question now is, is it  possible to connect it to my computer? It only has One RCA  (Actually, I'm not sure its called RCA. The cable that plugs into it looks like this video in cable. I was wondering if this;=UTF8&qid;=1324852028&sr;=1-6 would work? Does anyone know please? Thanks in advance

Topic by schumi23   |  last reply

Laptop Keyboard Connection

Does anybody know how a laptop keyboard connects to the laptop? I'm having some trouble finding out. Also, more importantly, is there a way to convert this connection to USB or PS/2? I'm thinking about an awesome keyboard mod... so any help is greatly appreciated.

Topic by bomberman3   |  last reply

Transformers connected in reverse

Hi can a transformer connected in reverse. if 230v to 12v transformer is connected in reverse,. will it generate around 230v Just some silly doubt. Actually i was trying to find a step up transformer.. which converts 6v to 24v. what exactly its called.

Topic by nominds   |  last reply

bridging my connections

I need help bridging my connections. everytime i try it says i must select two LAN connections that are not using internet connected sharing. i have looked all over and am pretty sure its all off, it wont let memerge the two together by highlighting them either it just moves the connection order around please please help. thank yoou!!!?

Question by RECONWARRIOR   |  last reply

Connection to Laser 5mW

Hello, I wanted to ask you guys where should connect +3V and ground from this laser pointer assemly, I have 10 of these lying around. So please tell me where I should connect +ve and -ve

Topic by atwajid123   |  last reply

Connection via mobile

Hi guys How to connect orange pi 1with android mobile via vnc app

Question by Mr Qatanani 

connecting laptop screens?

I have several old laptop screens and I would like to connect them together to show movies in my mancave using a dvd player is this possible

Question by 69olds   |  last reply

Laptop will not connect to server?

Windows diagnostic says WiFi doesn't have valid IP configuration.  IPads and Kindle work fine.  Was using it, shut it down, went back later and couldn't connect.  It also says that my device is connected but may not be able to access anything on network which I can't.  It also says to verify the network security key.  I checked and it is the right password.  FYI I am not computer savvy.  

Question by PeggyS56   |  last reply

Pararel connection Transformer

i want to combine two of 10 ampere Trafo, so i can have 20 Ampere power supply  i read a few article that say if we connect the sekunder(secondary) of identical Transformer in pararel, we can have a double time current flow on this connection. do anybody have try this before?

Question by beatobe   |  last reply

Wireless connection problems

I bought a new wireless card for my computer and i can find my network but it refreshes every 5 seconds or so, so i cant connect because it times out. any ideas?

Question by gantyman   |  last reply

antenna for wireless connection?

I would like to improve the signal from our modem.  (serviced by centurylink)

Question by MizDaizy   |  last reply

TI-connect for calculator

I'm having trouble loading "TI-connect" on my mac so that I can write programs for the ti-84 on the computer. After downloading ti-connect, I click on it, and it seems to want to install it again. I've done the complete loop, repeating the download process about 4 times.  Do any of you know what to do?

Topic by Toga_Dan   |  last reply

connect xbee to webcam? Answered

Hi im dng a project on traffic control system on emergency lane using image processing.Im done with the image processing i don't know on how to connect xbee transmitter to webcam..can any1 help me

Question by esanthana   |  last reply

Wireless connection issue

Hi there, I'm having a huge problem connecting my desktop pc to the new wireless network at my home. I can connect via laptop and iphone but just not via my desktop that is using a wireless USB adapter. What can I do to solve this problem? What information do you need for anyone to be able to be able to help.  Look forward to any help

Topic by Nzginga   |  last reply

Connecting a piezo lighter...?

I should solder 2 wires... one contact can be easily seen, but the other one seems to be... the black plastic???

Question by lllalllo   |  last reply

Wireless speaker connection?

How can i replace the wire between my laptop and woofer, with a wireless alternative, so that i can play music from wherever i want at home ?

Question by sunboy89   |  last reply

Repairing an Ipod connection

I have a 5th gen IPOD video and while I was replacing the hard drive some of the prongs on a circuit board connection (the thing the ribbon wire connects to) broke off. Now the ribbon wire will not stay in place, the ribbon wire goes in but is not very secure. I was wondering if there was any quick and easy way to fix it. I may need to replace the part and solder a new one in..I personally do not know how to do that but I know someone who can. I just don't know where I could pick up a new part...any ideas?

Topic by breaddemon   |  last reply

Wind Generator Connection

I have a generator that provides 15.5 volts and I have it to one DC 12-volt Battery. I am using a 30Amp Diode, but when I connect the cables to the battery and the output only reads 12.75. When I turn on the 750 watt inverter, It seem to overtake the battery, and takes in very little charge. The battery is new and tested. What am I doing wrong? Thanks, Alex

Question by    |  last reply

how to stay connected?

My t-mobile acct. has been disconnected.But with my husband in Icu I kinda need my phone.If  I buy a prepaid sim card can I still use my T-mobile phone?Desperate in Fl.

Question by miamihomegrl   |  last reply

​Teachers! Let's Connect!

Hi, everyone! I'm Jess.Before joining the team here at Instructables, I was an Elementary STEM and ESE Teacher, and I have loved art and maker/DIY projects pretty much my entire life. Recently, I’ve seen some really awesome and inspiring projects and noticed that the authors were teachers, so I thought it would be cool to connect here and share what we're working on with other teachers who also love to tinker and make. I'm so excited to learn about what you all are up to and celebrate your crafty, techie, maker awesomeness! :DFeel free to say hi and share about the things you love to create or link to your most recent project in the comments below.

Topic by WeTeachThemSTEM   |  last reply

Connecting a soundbar to a tv?

Me and my family recently purchased an Auvio soundbar from radioshack. It came with an RCA cable to hook up to our TV. However, my TV uses an "S/PDIF" jack for audio. I don't know where to get one of these, but it's been really inconvenient having to switch the RCAs to whatever component I'm using at the time instead of just hooking it up to the TV. What should I do? 

Question by General Eggs   |  last reply

Connect camera to NXT?

A friend and I are currently developing a turret that has a stationary camera attached to it, and two servo motors that move the actual gun part of the turret up/down and left/right. I am using software already developed for the program, and I plan to use my NXT to run the software and act as the driver for the servo motors using some modified cables. My only problem is that since I am running the software on the NXT, I need to be able to set up the USB webcam I have so that it inputs it's data into the NXT unit. The problem is, I have no idea how to do this. I was thinking of using the standard cable the NXT comes with that has a USB end, and connecting it to the USB end of my camera with a double female USB adaptor, but I'm not entirely sure that it will read this as an input. Also, I need that port available for when I calibrate the system on the computer. Does anywone know how I can modify the male USB connector of the camera so that I can plug it into one fo the NXT's input ports? Any help would be great. Thanks!

Question by pyrorower   |  last reply

Why is my IBM thinkpad T42 so slow?

I just got a new hard drive for my t42 and reinstalled ubuntu but it is just extremely slow. I am using it in wireless mode, and I have multiple computers connected to my modem in my house. It takes about 10 minutes just for me to get to my IGOOGLE page. My laptop also keeps cutting in and out of connectivity. Thanks

Question by acidbass   |  last reply

Internet connection problems? Answered

Hi!  I am running Windows XP on a virtual machine.  My NIC settings are for a bridged adapter, and I need to keep it that way.  The host computer can communicate with and silverlight just fine, but my virtual machine can not (although every other website that I have tried works just fine... I'm actually posting this from my Virtual machine).  I also have a server that is running server 2003 that has the same problem.  All other PCs are running either Windows 7 Pro, (and my parents have Vista Home Premium).  Every computer including my parents work just fine with and silverlight.  My router is running DD-WRT micro, but I don't know if that helps any.  Since Server 2003 and XP both have the same problem, and Server 2003 is based off of XP, I'm wondering if it has something to do with XP.  I am using my virtual machine for testing purposes, and I need it to work with silverlight.  Any suggestions on how I might fix this? Thanks!

Question by thegeekkid   |  last reply

How to connect a diode on parallel solar panel connection? Answered

I am making a foldable solar charger. I will have 3 panels connected in parallel, for a total rating of 5 volts at 1.5 amps. This will connect directly to a USB boosting converter for a maximum output of 5V at 1 amp for charging or powering a USB device. No batteries will be connected. Can I just use a diode on the + wire where it connects to the USB charger or do I really need one on each panel? Thanks for any help!

Question by Stevemills04   |  last reply

cellphone wont connect to my wi-fi but will connect to others?

I recently bought a new cellphone and it works fine connecting to various  wi-fi points except my own home one, other cellphones connect to my network no trouble.  modem model is RG27- 01HGV-0

Question by simonburgess   |  last reply

How to connect my arduino uno to Internet to connect to MYSQL

Hi - I have arduino uno card which has a light sensor. I would want to transfer the light readings to MySQL database. How do I do it? I can write a sketch that can connect to MySQL and insert the data and upload the same to arduino card. But how will my ardino card connect to MySQL. Can you help me here as I am beginner to these topics? Regards, Harish

Topic by harishkompelh   |  last reply

Circuit works when I poke a connection, but the connection is sound

So, I've started playing with vfds since this weekend jaycar (if your an Aussie) is selling 11 digit, 10 segment vfds for $1.90. Cheap as :P. It runs off 12v for the segments, 4.5v for the filament. I'm using 3 4094s to control the segments and an atmega168 to control the 4094s, using 3 transistors to up the voltage between the 4094s data, clock and latch pins and the the atmega I/O ports. I'm pretty sure everythings hooked up correctly but, as with most projects, it's not working first time :P. Here's the thing, it works if I poke either the green or brown connection with just one probe of my multimeter/finger it works. My first thought is that i've hooked up my transistors incorrectly, the base is 5v with a 2.2k current limiting resistor, and the collector is 12v with a 5.1k current limiting resistor. To much? I blew out a resistor in initial testing and it got me a little worried :P Thoughts?

Topic by greendude   |  last reply

Connect arduino to HP Laserjet

Hi, i want to connect a USB printer to an arduino to control it, i know that i can connect a Printer by using the Parallel cable, but my printer only works with usb. Any ideas????

Topic by gastonbr100   |  last reply

how to connect wifi network?

My laptop catches wifi network showing excellent signal level but whenever i tried to connect it shows limited or no connectivity. what could be reason and how to connect it,is there any way to get the network ip address and to manually laptop is lenovo y510 52q.

Question by rachit59   |  last reply

Connecting Arduino to raspberry pi

I need to connect the Arduino to raspberry pi and program both with labview Is there any instructions please

Topic by mustafaa201   |  last reply

Connect a DC plug to a Timer?

I have 2 strands of led lights that go up a Flagpole on my rv, I am trying to figure out how to connect a timer through the DC Plug Thanks in advance Mike

Question by quine9   |  last reply

How to connect multiple computers

I am trying to learn how to connect multiple computers so that they work together as one. How do I do this?

Topic by PlainsPrepper   |  last reply

Connecting the coil and circuit in coilgun

When i connect the coil with the circuit, there spark in the switch. Is it because the switch doesn't strong enough ? The projectile didn't fly.

Question by shinizaki   |  last reply

connecting xbox to secure wifi?

Im in hotel and trying to connect to thier wifi. have user and password but xbox does not promt for them.connects to network but not to internet.

Question by robeh44 

How to connect IR receiver ?

Is this an IR receiver ? If it is, how can i connect it to a (or a few) LED's so that i can turn on the LEDs remotely? Please help, Thanks fujiapple

Question by fujiapple   |  last reply

How do I connect these? Answered

I am trying to connect a bluetooth dongle to my Bose headphones because I saw it on instructables. The only problem is the number of wires. The instrucatble shows three wires while my bluetooth headset only had two. Should I try to connect these two to the corresponding colors on the other?

Question by metalshiflet   |  last reply

How should I connect ?

I have a reciver and i want to make an rc car, But the reciver has to weak signal so I decided to use the reciver as a switch wich will connect the motor to the battery,but I dont know how to connect When the motor is spining forward,and and push the buton backward on the transmitter the poles change and it doesnt work any more So how I need to connect

Question by Mrfatjonable   |  last reply

iPhone charger connection to sound?

How do you connect an amplifier to amplify the sound through the charge connector and still be able to charge the phone for an iPhone4 instead of using the headphone out to amplify the sound?

Topic by bricabracwizard   |  last reply

how to connect laptop to tv?

My screen broke on my toshiba notebook. i wan to plug into my tv

Question by shulk   |  last reply