How to Mount that ? Answered

******************Disclaimer *************************** So first Of all........ only positive answers...... no negative sentence ...... questioning my ability ,Knowledge , "Right Tools" comment in bio....... if you want to answer , answer ...... i'll thank you........... if you want to comment on me...... sorry but i don't want that stuff......maybe i am a loser.... maybe science is not for me........ but budd i Don't need your advices. (i am pointing to an old man in the community , who does nothing else than to insult others.. sorry old man but i don't need your help.... every other person who wants to help is welcome.....) ********************************************************* So the question is....... that i am about build a pc......... i searched lot of cabinet's onn web...... and ended up deciding to make my own...... and as i searched for diy cabinets i found a wall mounted pc...... i understood everything in that tutorial...... except for one thing...... how to hang that thing on wall....... should i use screws or any kind of mount........and are screws "safe" to hold my costly pc (actually it ate up my whole year's pocket money.). and if so , haw many i need...... what precautions i need to take . ? and one thing more....... what are those rod's called which are holding the glass on the case ? 

Question by _Boltz_   |  last reply


looking for motor mounts

I'm wanting to attach a few motors to a wood frame; however I'm not sure how to go about doing this.  The motors I'm using are in the picture; you'll notice their really isn't any holes to attach any mounting brackets of any kind.  I was thinking of using a 3/4'' pipe clamps, but was wondering if anyone here has any advice or experience with this.

Topic by Spaceman Spiff   |  last reply


how to mount an image? Answered

How do you mount an image using daemon tools

Question by    |  last reply


Using a mounted drill to power axle mounted device

Hi, I have just constructed a chicken plucker as in the photo. As an initial attempt the device worked really well - except for the connection of the drill to the axle. This was not well aligned so it ate the threaded bar which was trying to pull itself out and not helped with the thread direction. Are there examples of how to better power such a device?  I would like to be able to re-use my drill, I suspect properly aligned would work better. I could also swap to a non threaded bar but would need suggestions on how to keep the plucker barrel in place. Cheers

Topic by expatty   |  last reply


moving across the country-need some kind of camera mount.

I'm moving across the country. I'd like to make a video consisting of short clips every single stop we make, but I need a way to make sure I get the exact same camera angle every time I set up the camera. Camera angle to include some of the U-Haul, whatever is in the immediate vicinity and my wife and I, dancing of course. Any ideas?

Question by kurtquinn   |  last reply


Name this thingamajig

Hi I'm trying to locate or build something I don't know the name of and searching around hasn't proved helpful, perhaps somebody here could put a name to it so I at least know what I'm searching for?  It's a mount which allows something to rotate  horizontally a full 360 degrees  continuously (similar to the column rotation on a tripod) however the object to be rotated needs cables passed to it through the mount unhindering the rotation - some sort of contact connection?  Ideally I want the mount to have a powered rotation but putting a name to this would get me on the right track. Thanks in advance. Garrett

Topic by garrettlynch   |  last reply


how to build a x-ray view box?

I would like to build a x-ray view box. I think it is similar to a light box for photography.

Question by drstephob   |  last reply


iPod touch mount for tripod?

 Looking to mount a new Apple touch on a camera mounting bracket. So ... no gooseneck extention -just a sinple right angle bracket of some sort. I might be over-thinking this - but thanks for your assistance!

Question by clintbradford   |  last reply


(SOLVED) Mounting Slide Potentiometers

I need help for a project I am soon to begin work on ('ible coming soon). It will involve several switches and potentiometers mounted on a piece of hardboard. The switches and rotary potentiometers I have all have washers (or whatever you call the hexagonal things with screw-like threads on the inside) to secure them in place. The slide potentiometers don't. My question is this: How would I mount the slide potentiometers? Thanks in advance, ~H4ZZ

Topic by __DELETED__   |  last reply


Retractable mount for stepper motor

I am currently working on a small project which includes a 28BJY-48 stepper motor. I want to make a retractable mount for the motor so I can extend it to a desire length. What is the recommended way to do it? I thought about intalling two metaling poles inside the body of my device which will be connected to motor and to use pg16 glands as a twist-lock locking

Question by eliariev   |  last reply


UV Surface Mount LEDs

I am currently modifying an iBook G3 so that, among other things, it will be fluorescent orange. Currently, when the computer sleeps, a white LED illuminates through the casing. Since the casing will now be fluorescent, I would like to replace the white surface mount LED with an ultraviolet one, so that the case will glow as the computer is sleeping. I was wondering if someone could help me out by telling me where I might be able to purchase an ultraviolet surface mount LED? P.S. The image included will be stenciled and mirrored on each side of the apple on the top of the iBook.

Topic by Ora   |  last reply


Need a DSLR Car mount

browsing for parts, thinking about resting it on the window itself. just looking to see if anyone has any type of ideas? This is pretty much my plan at the moment but I have to find parts for it. http://i.imgur.com/FrIGm.png But with this plan I for see 2 issues 1. The arm would most likely swing from side to side when speeding up or slowing down 2. If you wanted to record the driver, the window has to be down for this plan so wind would seriously be an issue. You could solve the first issue by using 2 arms, but windows are curved so.. im not so sure about that.

Topic by Ampix0   |  last reply


Hard drive won't mount?

So, I've had a toshiba 2.5" SATA 250 GB internal HD for a while now. I got it from an old toshiba laptop. I finally got an enclosure for it, and I plugged it in. windows made the sound it makes when you plug something in, and in device manager the usb port said a usb mass storage device was plugged in, but it didn't show up in my computer, nor did it show up in disk management. I searched the net for hours trying to find the problem, reading about how you might need to assign it a letter in disk management, and other more "grim" outlooks on how it might be dead. I listened to it closely, and heard it making very VERY soft ticking noises at a regular rate. I immediately thought the worst, and came to the conclusion that it was dead. The next day, I decided to take it into school with me, as my teacher was pretty smart when it came to computers, and maybe she could provide the tiniest shred of hope. She asked me to plug it into one of the school's desktops. I plugged it in and...it began running like normal. It showed up  on my computer, and showed the correct disk size, as well as a document I'd put on there long ago. I couldn't believe it!  When I got home, I plugged it into my computer, but surprisingly encountered the same problem. I decided to do a bit of experimenting, and I started plugging it into various computers we had around the house, and lined up all the facts I had: It didn't work on my laptop. (runs windows 7 home premium) It DID work on my mom's laptop. (also runs windows 7 home premium) It didn't work on my old desktop. (runs windows xp home edition, but I don't trust it. It's been acting very weird lately) It DID work on my school's desktop. (runs windows 7 enterprise) It DID work on my sister's laptop. (runs windows 7 home premium) I was stumped, to say the least. Can any of you tell me WHAT THE HECK IS GOING ON?!?!?! The strongest lead I have is that it might not be working correctly on my computer because the usb ports can't provide enough power to mount it. But if my laptop can't mount it, why should my mom's or my sisters be able to? Please provide any other theories you may think are plausible too! 

Question by tylervitale   |  last reply


Homemade ROV camera mounting

I'm looking to set up a homemade ROV (probably using the SeaPerch or Seafox designs) and was wondering if anyone had successfully mounted a camera onto either of these systems. If so, I'd really appreciate it if you could shoot me a message. Thanks!

Question by gmaynard   |  last reply


Mounting stuff on the Roomba Discovery

I keep seeing instructables about how to make stuff out of an irobot create, and got jealous. When my uncle got bored of his roomba discovery, he gave it to my grandma, who gave it to me, because she knew that I wanted it. When I got my hands on it, I searched through those Instructables vividly, hoping to find something to do with it (other than clean my house), but they were all for the create! So, I was wondering how I could mount something on top of my roomba. I also want to be able to program it. I found some sort of port thing underneath a cover on the side, I'm not sure if that's it. Finally, I want to know where I can find the cable that may or may not connect this port to my computer. Thanks.EDIT: I added some pictures.

Topic by YummyPancakes   |  last reply


How to mount Peltier elements?

A peltier is a element that gets very hot on one side, and very cold on the other side. Cold enough (with enough power) to make frost all over it. So. I got one, I want to make nice cold cold air. I read wiki, if you don't heat sink it, it will self destroy. If I heatsink the cold side, then a fan on the heat sink to blow the cold freeze air, will it be fine? Or must I cool the hot side too? Peltiers are cool :D

Topic by Killa-X   |  last reply


Mounting Lenses On Your Microscope

I found a broken cell phone with it’s camera and wondered if the lens could be used as a microscope objective. Image A shows the lens and it’s mounting with the CCD. The back of the lens is shown. The lens is about 4 to 5 mm in diameter. The starters from florescent lights make good lens holders. Image B shows a starter along with my modifications to hold the cell camera lens. The starter tube has 4 slits along the length so it can be compressed to fit the turret of the microscope. Image C shows it mounted on the turret. Image D shows the resulting view of a feather. It’s quite bad. Image E shows, for comparison, the view through an ordinary 20x objective (.40 NA). Here are some more lenses that I tried: Lens from a discarded flatbed scanner..... Very good! Lens from a 8mm movie camera...... Fair. Lens from the laser pickup of a discarded CD player..... Almost worthless. To take pictures through the microscope, I used eyepiece projection with a wide angle eyepiece. The lens on the camera was set to wide angle and maximum aperture, with a remote used to trigger the shutter. The camera’s LCD was used to focus and adjust the image. The camera’s autofocus handles the rest. For even illumination, be sure to center the objective lens over the substage condenser.

Topic by ShutterBugger   |  last reply


GoPro Scuba Cylinder Mount

Hi there, I'm new here. I've recently found an entry-level 3D online modelling software, Tinkercad and have been Tinkering ever since. I'm into scuba diving and I've long wanted to design a GoPro mount for the cylinder to give a 3rd person view of me while I'm swimming about enjoying life underwater. (Think a less-sexy Lara Croft!) I wanted to run it past you guys to see what you think. I've attached 2 screenshots, because as you can see, the mount I've designed is collapsible, to save space in my GoPro bag. I've done the maths (Pythag) so each side is perfectly lengthed to create a right-angled triangle, with the hypotaneuse (long edge) is facing down my body, towards my feet, so that the camera view won't be obstructed. I've used a Pythag triple, so the arms measure 3", 4", 5". This was done for 2 reasons: a) It was easier to desine using these measurements and b) I don't want it sticking too far up from my cylinder so that it doesn't catch on wildlife/coral/divers. As this is my first GoPro mount that I've designed, I've had to go on deimensions I've found online for the actual hinges. I've settled on approx 3mm for each prong as well as the gap in between. I have actually shaved off .25mm from the middle prong of the 3-pronged-hinge, and left the 2-pronged-hinge at 3mm for the gap and prongs. I'm going to get the pieces 3D-printed by a local service I've found on 3DHubs.com, either in ABS plastic or in resin, though I'll probably go for ABS as it seems to be a bit more hard-wearing, even if it's not so detailed. In terms of mounting it to the tank, I will use 2 headstraps, with the over-the-top strap removed from each one and glue the plastic bits of each of them together, at the correct length of course. I would join them using a seperate piece of plastic and either a hot glue gun, superglue or even some sort of epoxy, whatever lasts longest in prolonged exposure to seawater. I would probably place it nearer the top of the tank, near to where the strap of the BCD jacket goes round it. Does anybody have any advice for me in terms of the design from a functional point of view as well as from whether they think it would actually get a good shot on the camera please? I look forward to your feedback, good or bad!

Topic by JackIsted   |  last reply


Is there a common standard for mounting servos to other things? Answered

For exmple - is there a standard bolt pattern or splined post that you have to consider when working with a servo or does it vary? Thank you!

Question by DanShort   |  last reply


Recommendations for mounting a 2.5" HDD in a small space

Hi, I'm currently trying to put together a small computer. I have a very limited space in which I can fit the motherboard and a few other components. Most of it kinda fits, but i'm not entirely sure how to mount the hard drive. The HDD is a 2.5" one like this one, with those dimensions: L:  100mm W: 70mm H:  8mm And once I exclude all the space taken by the other components, i have about that much space to fit it in (including the mounting parts): L: 170mm W: 40mm H: 75mm See the attached illustrations I made to get a rough overview of the space in the box. Note: I can technically extend a bit out vertically (height-wise) as the cover has a bit of gap inside but probably no more than an extra 15mm. The drive has screw holes on the sides and on the back (cf. the linked WD page) so there's a couple of options there. I'm not really sure how to go about this. I may be able to salvage some metal mounting parts from an old desktop but I would have to do some cutting to it and I don't have much room to move around for the mounting part. Another of my concerns is it'll be difficult to attach/remove the drive if I need to, because the bottom screw will be very hard to reach. Maybe there's a way to make a mounting rack where one part slides off to make the screws more accessible, I don't really know. Do you guys have any suggestions? How would you go about this?? I would much appreciate any tips, suggestions or even comments. Thanks Ben 

Topic by ben_dog   |  last reply


Quick SMD question

I am just getting into SMD work for PCB's & I was curious when I am using the electric skillet method for solder reflow does the PCB have to sit on the skillet itself or can it slowly pass over & the heat that is coming up from the skillet still cause the solder to flow like it would sitting on top.

Topic by sofiadragon1979   |  last reply



Best way to attach non vesa monitor to monitor stand.?

I purchased a monitor and realized that it does not have the VESA standard holes in the back.  Does anyone know of any way to use it in a normal monitor stand type configuration such as http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=4521948&csid;=ITD&body;=MAIN#productresources.  Could you use a product like JB weld or Gorilla glue to just glue a mount to the back or is there a standard type solution out there?

Question by mattbliese   |  last reply


Not needing root access to mount drives?

I have been using sshfs (mounting SFTP servers) with MacFUSE on my Mac Mini (Snow Leopard). When I mount an SSH server, I can do it without having to be root, and i'm fine. My friend, on the other hand, tries to mount my SSH server, and it says access denied. He then runs the mount as root and it works fine. The issue with running as root though, makes it not accessible by Finder. He's an administrator on his computer (which is Snow Leopard on a MacBook (White)). How can he mount it as himself (his account)?

Question by conradev   |  last reply


How to connect BNC_PCB mount 'configuration ' ?! Answered

I need to know the connections 

Question by nobykobe   |  last reply


Off board LED mounting. Crimps?!? Answered

Hi,I've got a project I'm working on requiring sixteen LEDs to be mounted approxomitely 60cm (23") from the main PCB. I've been looking at soldering 60cm lengths of wire onto each one and then using female headers  with a crimp on the end and then plugging them into a row of male headers. I have no crimp tool, will I need one? Is there an easier way to accomplish this? Thanks!

Question by inbox.jason   |  last reply


How to remove an M42 Lens mount? Answered

Hello, I recently bought an adaptor for my Canon 600d ( rebel 3 ? ) to allow M42 lenses to fit to it. That was fine but the adaptor is stuck on the camera. It is not cross threaded. I have tried using slip-jawed pliers really hard, but not as hard as I could because I was afraid of damaging something. There is a small hole in the front of the adaptor if I press that and turn it , the adaptor separates, so I stopped that method. Any advice ? If not , I'll just go with the pliers as hard as I can. Thanks

Question by FriendOfHumanity   |  last reply


Partitioning and mounting images to flash drives? Answered

I need to do the following: 1.) Partition the 2GB flash drive into 1 1GB, and 2 512MB's 2.) Burn a bootable ISO (Auditor) onto the 1 GB 3.) Burn another bootable ISO (OPHCRACK-XP) onto one of the 512's 4.) Burn another bootable ISO (OPHCRACK-VISTA) onto the other 512. 5.) Have the little bugger acutally WORK Thanks a lot guys -- J0n@$

Question by iBurn   |  last reply


Steampunk wrist-mounted scrolling map

Found this at Boing BoingOver on Boing Boing Gadgets, our John spotted this vintage wrist-mounted scrolling map from 1927, an antediluvian wrist-mounted GPS: At first glance, this 1927 map watch is pretty nifty: an antediluvian GPS, don't you know. It was called the Plus Four Wristlet Route Indicator, a name so clunky, unmemorable and artless that it even sounds like the name of a modern GPS device. The idea was simple: the Wooster-esque motorist would putter around England, scrolling a tiny paper map loaded in his wrist as he went with two black knobs. If you took a turn, you simple slid out one map and inserted another one and continued on your way. What ho! Ingenious! Except a complete road map only cost a few pence back in 1927, where as this device would have set you back around 5 quid. And just like modern GPS map providers, the real business model was in selling you additional maps. Which leaves the design. I quite like it: it's cheap, but whimsical and adventurous, like something you might strap on your wrist to traverse Oz. LinkLooks pretty cool and steampunkish. I would love to have one.

Topic by laminterious   |  last reply


Help! Questions about virbration absorbtion for SLR bicycle mount

Hey Guys!Firstly I just stumbled upon this site while searching for answers to my build and on 1st glance it looks great! Loads of cool stuff to try..Anyway, I'm looking at building myself a camera mount for my Canon 350D to go on the front of my bike. My main issue/worry is vibration running through the bike and the mount to the camera and damaging it. I've seen loads of instructions on how to make bike mounts on here, but am still worried about the damage that could be done to my camera (my pride and joy!) if I undertake my project without dampening any vibrations from the road.I'm going to be doing timelapse/stills photos from the front of my bike around London (not the smoothest of roads!) so want to be sure I won't be damaging my camera doing it. The front of my bike has decent suspension so should take the hit of the bigger bumps but it's the smaller, higher frequency vibrations that worry me.I've searched as well as I can at 2am but can't find any of the instructions covering the topic of vibration, so I was wondering if there are any mounts or heads out there that are designed for this purpose or if anyone has built something similar with success (or lack of camera damage anyway!)As I'm doing stills work I don't mind about it being slightly 'wobbly' it's more the vibrations that worry me.I've found websites selling anti vibration materials (http://www.farrat.com/anti_vibration_materials.html) so I wonder if that could be incorporated into a more general design.Thanks in advance for any tips or links! And sorry if this has already been covered but I've not found it!Ian.

Topic by flying_giraffe   |  last reply


How do you attach the stepper motor shaft to the rotor axle?

I have two small stepper motors from a dot matrix printer that was being thrown away.  I have a wind mill ready to go but cannot figure a way to attach my 3/8 rod to the stepper motor shaft.  Any suggestions?

Question by karana   |  last reply


lcd stand or bracket?

Hi have an LCD and finding a mount seems to be almost impossible. To attach a mount it first need to be recessed into the screen. The VESA dimensions are 200mm X 100mm. Does any one have any ideas as to as to how I can fix this monitor to the wall. The monitor is a Samsumg 2494HS Thanks

Question by enoted   |  last reply


water proofing a Garmin 765t for motorcycle usage?

Garmin 765T GPS Has anyone attempted to make one of these units suitable for use on a motorcycle ? This would entail a waterproof mount of some description and address any issues with over heating

Question by teppy dumppy   |  last reply


LED wiring and soldering help needed

Hey everyone! New to the forum here but not to instructables. For quite a while i've been looking into making an iron man arc reactor. I've learned how to wire and solder regular LED's but i am at a loss for how to wire and solder surface mount LED's. I've tried searching and googling for some answers but i haven't really come up with much. Can anyone help me out? Oh and a bonus question for not only surface mount, but also regular LED's. I know how to hook up one LED to a battery pack...but what about hooking up multiple ones? Thanks for any help! I appreciate it!

Topic by AmandaGbur   |  last reply



Ceiling mount for a Canon Digital Rebel XT?

A few minutes ago I found a link (mind you, I'm supposed to be writing a paper!) to this Oren Lavie video and I fell in love with it. I'm super interested in stop-motion photography & I would loooove to have a ceiling mount for my Canon Digital Rebel XT =) The only problem with this, however, is that I'm not very good with things like this! So if anyone could suggest to me how I'd go about doing this [preferably cheap, because I am a poor art student, after all!), or heck, even doing an Instructable on it, I'd be eternally grateful!]Yayay, thank you =)

Question by shantr0n   |  last reply


Threading and pitch for Microphone mount nut or stem? Answered

Does anyone out there know the threading and pitch for a standard condenser mic stem? I lost my mounting nut and even the manufacturer won't provide the info I need. It's a Presonus M7. It should have a standard threaded stem as most universal mounts fit it. I know it's metric, Possibly an M20 or M22 with a #1 pitch. Anyone know for sure?

Question by Sparkytastic   |  last reply


how to make a Helmet Mounted voice amplifier? Answered

I'm going to make a cosplay where the voice on the helmet will be amplified or just conected to a speaker, cos is hard to project your voice from a closed helmet, and... why not (since it dont burn the helmet), i was thinking on LM386 but the heat will burn me and the helmet material

Question by matokage   |  last reply


Old Smartphone LCD as Head Mounted Display?

I've got an old HTC EVO 4G, otherwise known as the PC36100.  I'm attempting to create a 1 to 1 display to connect directly to my computer for a cheap Head Mounted Disply.  I've attempted to use various wireless RDPs.  However, the lag while attempting to do ANYTHING is horrible.  So I attempted to find an app that would connect directly to the phone via USB.  I found two.  Neither of which I feel comfortable dropping money on with such poor reviews and trials that don't work. So finally, I decided why not just use the LCD directly.  No messing with the hardware limitations of the phone at all.  So I took the phone apart.  I got right down to the LCD itself and found that it has a 17-pin input.  But, I don't really know much about it beyond that.  I can tell you that the cable reads: Career 06 94V-0 <->2 C36_FPC REV A I even have a picture of it.  I think it's attached.  If not, I'll fix that. Essentially what I want to know is, what do I need to make it be a fully working LCD monitor for my computer.  I know I'll need a module to convert the signal from what it is now to HDMI or VGA whatever the case may be.  I also know I need power to the screen.  But, beyond that, I don't know where to look.  I've tried looking up the cable information, but I'm not getting great results.  Any help in the matter, would be greatly appreciated.  Thank you.

Question by seniorfrito   |  last reply


How to mount a portable suction machine tip to wheelchair to promote independance?

I have a portable suction machine on the back of my wheelchair. I would like to attach the suction tip to the side of the wheelchair somehow so I can remove it to use it but replace it when not in use. I go independantly for walks and get very frustrated when I can not reach the suction tip because it sits in the bag on the back of my chair. Any ideas would be appreciated. Thank You!

Question by marcia.groeneveld   |  last reply


Can I clip the leads off of the back of my Arduino Uno? Answered

I don't have enough money to buy or make a specialized case, so I was wondering whether I could clip the leads off of my Arduino Uno for a smoother back surface, or should I take a piece of scrapwood and mount it on that?

Question by TheWaddleWaaddle   |  last reply


How do I embed a 7" usb monitor in acrylic?

I'm looking to perform a case mod wherein I install a 7" USB monitor into a clear acrylic case. I plan to paint the inside of the case as well, but that's a different matter. The case in question has a decently sized area (allowing for at least 7" in width) directly below the main audio and USB ports in the front. (The left side of the front; the right side has three vertically-stacked 3.5" bays.) I am wondering what is the best way to go about cutting the hole in the acrylic and mounting the monitor to the front. I would prefer that only the front half of the bezel show above the case. I would be painting the bezel and the rim of the cut in the enamel prior to mounting, if that makes any difference at all. Let me know if I'm not making any sense. Thanks!

Question by ploogle   |  last reply


How can you make Gopro mounts with resin?

I have an HD Hero 2 and I would like to know how to make mounts with resin and harder.

Question by alspad   |  last reply


Tilt shift lens for point and shoot (with filter mount)? Answered

Hey i was just wondering if you could make some sort of tilt shift lens for a higher end point and shoot (like panasonic fz100) that has a 52mm filter mount, or do you have to have a DSLR with interchangeable lenses. Thanks in advance :)

Question by astroboy907   |  last reply


Head mounted camera records what you look at

The EyeSeeCam is a head-mounted device developed at the University of Munich Hospital that uses four cameras to record what your eyes are looking at. Two cameras are used to track your eyes, one records what your head is pointed at, and the last one uses the data from the first two cameras to record where they're looking. The creators list some nice uses for this, but I keep thinking that this would be great for a first-person shooter. Or maybe something more altruistic like an interface for those with ALS that the EyeWriter was designed for. EyeSeeCam via Hack a Day Reading a book with EyeSeeCam Part 1 from Johannes Vockeroth on Vimeo.

Topic by fungus amungus   |  last reply


How to make an Mark 6 reactor for mounting on a guitar?

I am trying to make my guitar look like the armor of Iron Man. I have seen lots of versions, but the Arc Reactors I have seen are all too thick to mount under the strings on a guitar. I just want to make the triangle that lights up in the center. What materials can I use to make the frame the exact size and height that I need? And what can I use for the top cover? I never made anything like this before. So any help would be appreciated. I included a pic of the guitar. I would like the reactor to cover where the middle pickup used to be. Thanks!

Question by Guitarplayer06 


Is there a proper way to mount a potentiometer to a perforated circuit board?

I would like to attach my potentiometer directly to my perforated PCB, and I was wondering if there is a correct way to do this. I was thinking it has something to do with the tabs.  I know I can just solder wires to it, and then solder those to the board, but I would rather not have it hanging loose. My pot looks exactly like this: http://angela.com/images/products/detail/370430015798.jpg

Question by erikp   |  last reply




What would make a good cushion for a bike mounted video camera to minimize the vibration?

By cushion I mean like a gel bag or something. See this video to give you an idea of what I'm talking about. It appears that this clip was shot by the mounted camera which can be seen, but it actually was shot by holding the camera on a monopod in one hand as I rode. The mounted footage was way to jittery. The mount that is there on the crossbar needs to be cushioned somehow to at least make it as good as what you see, but not some big Steadycam contraption. The obvious answer is a good POV cam but the good HD ones are serious money. I appreciate any head scratching on this one.http://www.e-webvid.com/65TVBlueBoy_500k.html

Question by dayjack119   |  last reply