Night Vision

Hey, trying to find a way to get a webcam to display on a LCD viewfinder without the computer in-between so I can mount it on an airsoft gun. I know that the data format for the webcams output isn't reconizable by the LCD screen, I was thinking there would be a way to use a digital camera by feeding it the data from the webcam instead of the camera allready in it but I have no idea how to do that since I've never worked with this kinda stuff. I'm using a webcam because it's easier to open it up and remove the infra-red filter, I plan on mounting IR LEDs to the cam so it has "night vision", them mount the camera on the top of the gun with the viewfinder on the side so you can see. I tried to do this with a cheap video camera since it allready had everything I wanted but the camera module was too small and I ended up braking it. Any ideas? advice? things I should look into? any help would be nice!

Topic by Stotko   |  last reply


Restore night light? Answered

Is there something I can do to make night lights like this work again?  The package always says 'lasts a lifetime', but somehow mine always die after just a few years. This has happened with several different brands.

Question by mole1   |  last reply


Night Vision camera

I just picked up a pair of the eyeclops nightvision monocle for $50 after screwing with a pair a friend has, i have been messing with them and despite the fact they look like a toy, they are pretty impressive. I plan on modifying them so their less design oriented and more practical.My question to anyone who knows about or has a pair of these how hard would it be to hook a camera up to them. my plan is to take a webcam and remove its camera then solder wires from the webcam to the camera on the monocle. anyone else have any ideas?http://egeste.net/wp-content/uploads/2009/01/jakks_nightvision_goggles.jpg

Topic by arch_angel07   |  last reply


Night vision surveillance

Hi, I made a surveillance system out of 2 cheap web cameras. It works perfect, but night is the problem. I need to make it possible to record during night. I can't buy some professional IR cameras right now, but I got new neighbor who makes problems, and he is the reason why I am doing this. I found in local shop some IR diodes "100pcs 5mm 940nm IR" which cost about 5€. Are they good for my needs? They have to cover about 5-6m outdoor. And can I use them for my cheap web cameras? Any suggestion is welcome, need your help, or soon my stuff around a house will disappear!

Topic by AdvanŽ   |  last reply


which LED is best for the Super Night Vision, 850nm or the 970nm? I'm going for stealth.? Answered

The ebay site says that there is a red glow from the 850s and the 970s are invisible

Question by kuhldad   |  last reply


i cant get a video signal on my hacked camcorder CRT?

Im trying to make a night vision scope and i cannot get the video on my screen i can get it lit but thats about it 

Question by phunky_phantom   |  last reply


How can I arrange lenses in a way that will help me focus on close objects?

I want to build night vision goggles, and I decided to connect a camera to a screen that would be mounted on sun glasses. The only problem is, that the screen is too close to my eye to focus on. Is there an arrangement of lenses that would solve my problem?

Question by yonch   |  last reply


night vision palm pilot?

How to make a night vision device using a palm with camera, step by step instructions. Using the available camera on a palm

Question by chuyleo   |  last reply


Making night vision goggles

I have read and watched a couple of videos about making night vision involving welding masks, sun glasses, digital cameras ect.  i was tempted to make the sun glasses attached with lcd lights, but the brightness may be a issue.   I thought of doing it with a pair of goggles like snowboarding goggles with the red and blue paper but im not sure how i would house  the power supply for led's.      What i would like to do is get a webcam and make it inferred and add extra Led lights, and situate this on top of the goggles visor then because i have a broken PSP (i say broke someone stole the battery and i just haven't used it in 2 years) wire that to the camera if possible so the PSP receives the picture and can power the LED's and camera. Then make a housing for it to sit in front of the visor.   That would make a great pair of goggles to go paint balling with. If that isn't possible what would be better using the red and blue paper, removing the the webcam internals and fill the housing with led's powered by a battery, Still situated on the top of the goggles.    Or taping a digital camera instead of the PSP camera to it.   What would have better quality for inferred? There's no point me demolishing a camera or a PSP if adding paper to the lens does as good of a job

Question by Lloyd;)   |  last reply


Screen to use for night vision monocular?

Hello, I'm working on making a night vision monocular according to the tutorial at http://www.lucidscience.com/pro-night%20vision%20viewer-1.aspx but the viewfinder in the camcorder I got doesn't work. So I was wondering if anyone knew of a cheap (<$25) screen that I could display the output of a camera on.  I'm open to all suggestions!  Thanks a ton.

Question by Login258   |  last reply


how can i take good pictures at night? Answered

I have a Canon 40dsl and i am having trouble taking pictures at night. Does anyone have suggestions

Question by alizabelle   |  last reply


my camcorder doesnt have 0-lux capability, but sees the infared bulb lit, but not the light it emits, what is it seeing? Answered

My camcorder is a vixia hv30 and it can sense the strobe of an infared source (ie the tv remote) but not the light it emits. is there an invisible light source i can use with this camera?

Question by    |  last reply


video source on a Hacked Camcorder CRT

Hi all i have hacked up an old camcorder to get the CRT off it and i am trying to make a scope for my buddy in the reserves, i cant seem to get the video source to work.. ive seen people play gamecube and all kinds on them and i tried using a cut up wire from a dvd player output to it but no luck.. please help  ive managed to find out that the pink and red wire are my positive and negative so i can light the screen

Topic by phunky_phantom   |  last reply


might be interested solar powered led only 1,2,3,4 leds 2 AA cost less than 10 dollars. address both sides.

Sorry about too much up on Question in a nutshell these are great If enough people are interested I would be happy to show you how. I know its simple I am as new to electronics that there is but computers whiz just boring. Electronic could never get boring thats were real me do electronics. The difference between mine and the $149 ones is they have flaws that make them not good enough. its so simple once you do it right so bare with me I am disabled and my brain slowed down but see for yourself.

Question by caissex2   |  last reply


how to make my palm pda camera to night vision?

Modify my palm pda camera to be used as a night vision device

Question by chuyleo   |  last reply


How wood you get a night vision video camera in a package with enough power and memory to store 8 hours of taping?

I have a new test I would like to perform. this test involves puting at least three night vision camera's in a package and ship it to my house and then back to my work place. I would like to have the video camera record as long as possilbe and store the information so it can be down loaded and viewed after the shipping. I already have 6 30-LED infrared night vision CCtv wireless security cameras. I think one will run for about 8 hours if I have an 12v square battery. the camera has an RCA jack (yellow). so I would need a memory device that would link up to this and store the 8 hour time frame with no sound of course. I would also like to have it in a digital fromate if possible. My classes are keeping me jumping and work is hurried as well. I will keep working on this but if any of you have alternates ideals or somthing that will work with I got, I will be gratful to hear it. thank you. oh ya work is paying for parts so cost of this is not an issue for me at this point.

Topic by test professor   |  last reply


How do I separate a screen from a camer????

I want to make a pair of night vision goggles by placing a night vision camera outside the goggles, and a LCD screen inside, The problem is, I don't know where to find a camer that has a detatchable screen, I have a security camera, but it only hooks up to RCA. I don't know where to find a screen. Is there a way to disassemble a regular camera, and isolate the screen?

Question by Brakermaker   |  last reply


Iphone IR nightvision

I have been thinking of using my iphone 4 as an IR nightvision device. I have read that some of the Iphones have IR blockers built in. Does anyone know if the Iphone 4 can see IR light, and if it cant is their a way to make it? Thanks

Topic by strykerX_X   |  last reply


Day/Night sensor with 3hour delay?

Hi! I need to build a circuit for a friend. He has a billboard that needs to be lighted every night, but it needs to be lighted only for about three hours (until he closes shop).  The only problem is, there is no way to get mains power to the billboard, so we figured that we'd set a small 12v battery, solar cells, and some led tape, that would be enough.  Now all i need is a 12v circuit that would detect low-light conditions (night) and would turn on a timer which would turn off the whole circuit after 3 hours. I searched the net and my local electronics stores, but couldn't find a circuit that would suit my needs...  So any help would be greatly appreciated!

Question by Hrenowsky   |  last reply


Eyeclops night vision 2 review

              I haven't used the eyeclops night vision 1, so I can't make any comparisons. From the photographs, you can see two sets of lights on either side and a ring of leds around the camera lens. When in low power or "stealth" mode, only the lights on the sides are on. In the dark, the glow very dimly, you have to be 3 feet or less to see  them glow and it's still very dim. When in long range mode, the lights on the sides turn off, replaced by the circle of lights in the middle. These are clearly visible at close range, even in daytime, although still with less intensity as a red led. The knob toward the eyepiece is for adjustment of eye. I don't see what it does. The knob on the end near the camera adjusts focus. Seeing things at long range clearly and close range clearly require different adjustments. It's real infrared technology. You can switch between "military" and "spy" The difference between "military" and "spy isn't much. One of them is normal, infrared vision, and the other applies a green layer, making it seem like the view from COD. The 6 knobs along the middle don't do anything.  It uses 7.5 volts using 5 AA batteries. There there is only one LCD, despite it claiming dual LCD technology. The skirt on the eyepiece is detachable. The strap feels pretty cheap, I plan on making it into a head light sort of thing later with paracord or elastics. Objects appear closer and you have no peripheral vision though. The latter problem is something all night vision goggles have. Overall, it's not a bad deal for a $50 toy. The most annyoing thing is that the dials are a bit loose, so running or shaking them makes a rattling sound, giving away your position if you were doing covert sneaking around or playing a prank.        This is useful for scanning an area in the dark without revealing your location. It's also useful for night spying. What this toy cannot do is read words or anything in detail the size of words. Although navigation is possible, the lack or peripheral vision is a problem. Possible Mods: Add an airsoft or rc car battery to replace the 5 AA batteries. The half near the eye piece can be cut off I think. You would have to add a new compartment for the batteries though and the light from the LCD would leak out. I would add a strap of two so you can use it hands free. I would also attach a smal telescope or lens backward so objects appear normal distance. The peripheral vision problem could hypothetically be solved the same way people make DIY fisheye lenses. Extra infrared LEDs flashlights and other lights could be added around a house, allowing you to cover up the lights, not exposing your position. Another idea is infrared led throwies. They would function like NATO infrared glow sticks, allowing people to track a certain target or where to fire.

Topic by starwing123   |  last reply


Homemade Car IR Night Vision ?

I am a retired guy with less than perfect night vision. I have installed a LED Backup camera and portable display in my Camry and wonder how hard it would be to do the same only looking foreward. Ebay has a lot of IR cameras that include IR Light LEDs. Shouldn't I be able to connect one to my monitor to get some extra driving safety? Of course, everything is possible to the guy who doesn't know how to do it! Thanks in advance.. Here is an article from a BMW site I think............. "...In 2000, General Motors offered a thermal night-vision system in its Cadillac line of vehicles. The system was innovative, but it was also expensive and didn't produce very clear images. Toyota also gave night vision a shot, and even now the automaker continues to offer an in-dash system in some Lexus models. The Lexus system has its fans, but if it's so effective, then why hasn't this technology spread to every vehicle on the road? One theory is that it seems as if the technology just isn't fully ready for automotive applications. Not yet, anyway. As you can imagine, night-vision technology is expensive and if you use inexpensive components, the quality simply won't be there.  Two of Germany's automotive stalwarts, BMW and Mercedes-Benz, have taken a damn-the-torpedoes approach to in-dash night-vision systems. These two auto manufacturers have been offering night-vision systems in vehicles since 2006..."

Question by R.Snare   |  last reply


Live video for night vision goggles? Answered

Hi, I want to get live video streaming from this camera (http://www.amazon.com/gp/product/B00WSJIQH0?psc=1&redirect;=true&ref;_=ox_sc_act_title_3&smid;=AOEPEY6PZCP7F) to stream to this screen (http://www.amazon.com/gp/product/B0045IIZKU?psc=1&redirect;=true&ref;_=ox_sc_act_title_2&smid;=A1DBCKGXGABBQV) What do I need to connect them? the connecting cables on the two look to be the same so they won't connect. I would prefer to keep this all wired together (no tx/rx) Also, I don't see power inputs on either, what would I need to power them. I will use ir leds for illumination but that's all figured out (night vision goggles using something similar to fpv goggles with a camera on the front)

Question by baconatorbot   |  last reply


Nightvision glasses?

Im no pro but ive read that a digital camera can veiw infrared. Well is there a way to use a pair of sunglasses and rig up an old digital camera to them with the screen on the inside of the glasses and then attach ir emitters to the glasses so that i can veiw about 100 ft?

Question by trf   |  last reply


Arduino camera and lcd help? Answered

Is it possible to take a input from a camera and display it on to a LCD driven by the Arduino?

Question by squirt8500   |  last reply


What is that thing ?

Hello ! So, here is a series of pictures that my brother took about two weeks ago (2007/08/29, at 23:00 french local time). He was going to sleep in his van when he saw a weird blinking/moving light at the horizon. He put his digitalcamera (Fujifilm Finepix S5600) on his tripod, quickly configured it, extended the zoom to the maximum (optical + digital zoom) and took two series of photos with the burst mode. Then, he tried to quickly reconfigure his camera and to take one more manualy. Facts : His tripod seems quite stable : stars don't move from a picture to an other. As we can see thanks to the last picture (a photo of an other part of the sky took with the same parameters), the stars of the two series seems not to be "dead" pixels of the CCD sensor. Known parameters : ISO 400 shutter speed : 1/2.5s. He says he doesn't know what it is. With my other brother, we tried to find an explanation, but so far, we failed. What do you think about this "UFO" ??

Topic by chooseausername   |  last reply


I have a rope light on an exterior staircase.w a 120 VAC timer. Lights stay on all night. Need motion &amp; lite sensor. Answered

The lights need only come on at night and when motion is detected. Sensors need to be at the top & bottom of staircase. They need to stay on for as long as it takes a Senior Citizen to climb 15 stairs.

Question by velcro2   |  last reply


NTSC Viewfinder ?

Hi everyone, I know I bring a lot of questions and I don't post a lot of instructables (actually 0), but I'm looking for a very cheap (or even free) NTSC Viewfinder for a night vision goggle project , I've found viewfinder on DealExtreme , but it looks like it's not NTSC and it was expansive (from 30$) ... Even a black&white; one will do the job. Thank you for reading

Question by Anykey   |  last reply


Way Of Detecting Humans?

Is there ~~an easy way~~ a best way of detecting humans in the dark, or in a forest? Me and my friends play airsoft, usually in a forest, and it's hard to know where the enemy (other friends) are. I'm a sniper and I want an easy way to detect them. One way would be a thermo-camera, but those are expensive. Is there a better way?

Topic by guyfrom7up   |  last reply


Isolating the lens assembly and LCD from a digital camera

Hello, Instructablers, I hope you can help. I'm trying to make a functional pair of night vision goggles based on the premise that digital camera photosensors detect IR range light while the human eye cannot. I have an old, functional Sony cybershot that I'm willing to scrap for the job, but the innards are far more complicated than I was expecting. As I am trying for a wearable, head mounted unit, I would like to shave off as much bulk from the camera unit as possible -- I do not, after all, still need picture taking capability anymore, merely a digital display. Any suggestions on where to begin? EDIT: Correct me if I'm wrong, but the more I think about this the more it seems like it would be more practical to buy a standalone microcamera and mini LCD. However, what method of output and input would these typically use? Would a simple microcontroller like Arduino suffice to perform all the necessary processing to feed video from the camera to the display? Does any of this even sound reasonable? Thanks in advance and sorry if photography isn't the right section for this, Ninepound

Topic by ninepound   |  last reply


How do I pulse a LED to get a brighter glow?

How do I pulse an LED to get a brighter light? I don't know much about it, but I heard you can get double if not triple the brightness of a LED by pusling the ampage or something, causing it to briefly burn very bright but stop before it burns out. How do you do this? I want to increase the range of my IR leds. Many thanks, Alex

Question by homedogalex   |  last reply


Regular USB camera turned to night vision?

Is it possible to modify a standard USB camera into a night vision camera?

Question by S1ko_shadoe   |  last reply


Sharing a Night of Photographic Insomnia: HAYCORNS Version

The night just seemed to get weirder and weirder...  and then it carried into the next day...  It started off with me finding a bunch of pretty acorns and then remembering that acorns are called haycorns in Winnie the Pooh and that Tigger hates haycorns and then I noticed that some of the acorns looked like they had little hats and then I remembered the Silly Hats Convention and so forth... I wouldn't recommend going on a photography binge while sleep deprived.  

Topic by AngryRedhead   |  last reply


Chibitronics + Instructables Build Nights at TechShop Chandler

Have you seen chibitronics???  They're amazing! I swear I'd just read about these wonderful little sticky circuits, not a month before the invitation to this Instructables Build Night showed up in my inbox.  I spread the news and the whole shop was elated.  What ideas could be come up with for these little guys? I decided to structure this build night a little differently, as an experiment.  In the past our Build Nights have a been a one day affair, usually lasting for about 2-4 hours.  This time, I wanted to give participants plenty of time to think through and execute their concept.  I set up three separate days to meet. Our first meeting was to learn about the Chibitronics products we'd been sent.  We spent about three hours playing with them, and learning about them by using the provided templates online.  Folks around the shop thought they were the coolest thing since slice bread - they got a great response. After this meeting, I gave my particpants two weeks before the next meeting.  They were allowed to take one full Chibitronics kit home, to create their project. During our second meeting, I could tell that my friends were struggling to execute their ideas - so we brainstormed with each other about how to best move forward.  It was a great meeting, with a lot of neat ideas floating around.  So after about two hours - we set out to finish our projects. The last meeting didn't happen unfortunately, due to scheduling issues.  However, we continued to talk through the projects with each other via email.  Then it came time for our due date - and lo and behold, no one had an Instructable to submit.  I was surprised and not just a little disappointed about this.  Finally, two of the original five sent me their submissions... while a third sent me a few photos and the beginnings of what was to be their Instructable.  I cobbled together what I had of his idea, which as it turns out - didn't go as planned... but has the makings of a great final product!  If we can just figure out the programming... :/ So, I got a couple of cool ideas out of this Build Night - however I learned a lesson as the organizer, that perhaps this type of ongoing Build Night doesn't work nearly as well as those of the past.  So I think I will revisit my older model for future Build Nights!

Topic by coercionette 


Wanting to make a switchable IR night light

Every night I come home, I have to open my garage door manually and park my motorcycle. When the garage closes, its dark and I tend to bump into my cycles exhaust burning myself. Yeah pretty funny. Anyways I had an idea, since I already had an arduino uno board and an IR Sensor and emitter, I wanted to make a trigger-able light switch. But I wanted my IR reader to run on AC, like a night light. At the press of a button from my emitter, the IR would pick up the codes and my light would turn on. Is this possible? Some people say, just buy a motion sensor and plug it in, I say i'll just salvage it for parts and try to make my own. Whats the fun in buying it, when I could build it with parts I already have. I mean, I know AC is dangerous, if not viable, then I could resort to a 9v with a power capacitor so long as it doesn't drain my 9v instantly.

Topic by bprins   |  last reply


Colour Night Joule Thief kit &amp; PCB

Please see the instructable for the details and video of this project. *** This is a color changing LED version of "Night Joule Thief". Pricing is exactly the same. *** Kit (includes PCB) Pricing is $10.50 for the kit. Shipping is $5 for USA, $17 for the rest of the world. A picture of full contents is shown below. Kit 5 Pack Save by ordering 5 packs for $39! Shipping is $5 for USA, $17 for the rest of the world. PCB only Pricing is $4.50 for the PCB. Shipping is $5 for USA, $17 for the rest of the world. Payment To order, please go to my blog page at http://www.theledart.com/blog/archives/394. You will find buttons to buy, and checkout via PayPal. Please send messages or leave comments here if you have questions. Thanks!

Topic by ledartist   |  last reply


Can anyone really make legitimate night vision using a camera view finder?

I've seen tons of hacks with theatrical gel sheets and high powered IR lights, but is it possible to amplify the light from a view finder and make actual night vision, not a "night vison flash light" but somewhat, military grade night vision.

Question by Houston1   |  last reply


How can I make night vision goggles without theatrical gel sheets? Answered

How can I make night vision goggles without sheets of red and congo blue theatrical gels? I can't get them where I live and I don't want to buy on Ebay.

Question by Xenobia   |  last reply


Can somone make an instructable for working night vision goggles? Answered

Can somebody PLEEEEAASE make an instructable for actual night vision goggles? if one already exists can someone post it to this question? Okay, I know this question was very vague, but when I said actual night vision goggles, I meant actual, physical goggles. Not a camera effect or dress up goggles.

Question by tori1012   |  last reply


is there a way to make night vision goggles at home? is there an instructable on that?

I wanted to make night vision goggles so wanted to know the things required, the procedure, precautions etc. is there an instructable on this?

Question by ankur2893   |  last reply




I am making a solar ipod charger with the maxim 756 chip. Any help with the circuit?

I'm using the 756 chip to charge an internal 4.8v 600mA battery from a two 3v 6mA solar cells, which will in turn charge any device through USB. I figured this was the best way to charge at night, with no outlet, and no sunlight.

Question by MatanSilver   |  last reply


Need help w/ IR Camera project

Ok, so i am working on building a pair of Infrared night vision goggles, I have a $0 budget, so am making this entirely from recycled materials and material i already own, so please no suggestions requiring me to make a purchase, please :) here is my issue: I already have a camera that i am modifying to view infrared only, and i want to have the LCD screen go further from the camera than its ribbon cable will allow. i have considered cutting the ribbon wire and splicing wires between the two ends, but im afraid that it won't work and then i will have no ribon cable at all, and thus of course no screen. so if anyone has any solutions, that would be great

Topic by DIYLemon   |  last reply


Night Vision Goggle Help. Also cable identification!

 Hi Everyone, I am trying to make my own night vision headset/goggles following this kiplay's guide. I have a electric viewfinder from an old JVC GR-AX5 video camera. I have removed the viewfinder and dismantled it but I am not sure which of the 7 cables are, (i.e. ground, power, video etc). How would I identify this, and could you please go in-depth as I am not hugely experienced in electronics, but I am learning. I have enclosed pictures, if that helps, but I do apologise for the poor quality. As the picture is hard to tell, the cable colours are (not in this order); Black, white, red, redy/brown (i am unsure, i am colourblind), yellow, orangey and a pinky purply colur.  How do I identify them? On a second note, for anyone who has followed this tutorial, can you recommend a good camera to get in the UK? Many thanks, and I hope someone can come through for me, Alex

Question by homedogalex   |  last reply


Reviews : Motherboard Clock- Night Dim Arc Light !

Hi, Please refer to https://www.instructables.com/id/Motherboard-Clock-Cum-Night-Dim-Arc-Light-/ These are created using old computer and mobile phone parts. Please do feel free to express any types tips  or suggestion you  would  like to give. Thanks, Richi

Topic by RichiV 


Does night vision monocular + camcorder = nightvision camcorder?

Greetings all, Longtime browser, first time poster.  I watched Kipkay's video on using a cellphone with one side of a pair of binocs to create a sort of zoom lens and at that precise moment my dog began barking at some critter outside.  This made me wonder if I could attach a night vision monocular to a camera or camcorder.  I have an assortment of cameras at my disposal, I am a proud garbage picker, after all, and a nice NV monocular somewhere in storage. Kipkay merely positioned the cell phone camera in the right spot on the binoc lens and was able to see a reasonable image.  Has anyone tried anything like this with night vision?  If the idea is sound I'll dig out my gear and made a stand to keep it all together and post it as an instructable.

Topic by TsarNicholas   |  last reply


Could a person print their own night vision goggles?

Most everyone knows that night vision, be it infrared, or ultraviolet, or some combination of colors, requires a filter, or filters and a compatible light source. My question is, could the filters be printed out on transparent inkjet printable vinyl and applied to a plastic, or glass lens to achieve the same objective? And if so, would it work as well? What more can I say? I'm into cheap methods of doing things. The inkjet printable vinyl I mentioned is available from sellers on eBay and any pair of glasses, including safety glasses for wood and metal working are a likely item to apply the material to.

Question by Old^n^Tired   |  last reply


SoHa SMART's October 2014 Build Night with DODOcase

Getting down to business with DoDo Case at our recent board meeting where we were graciously given DoDo Case VR glasses by Instructables. http://www.dodocase.com/products/google-cardboard-vr-goggle-toolkit  for a build night!  It was a fascinating way to experience virtual reality on your smartphone and you know what they say; all work and no play...  We also created an Instructable in which one of our board members Ben Finio addresses the issues we though could be made better with the directions. Thank you Instructables team and DoDo Case VR for the great night and we look forward to many more!

Topic by Bullock STEAM MakerSpace   |  last reply


&quot;Joule Thief&quot; LED Night Light Kit &amp; PCB

UPDATE: Everything is shipping now. My instructable is here: "Joule Thief" LED Night Light  Check out the new color changing Joule Thief! KIT Pricing is $10.50 for the kit. Kit 5 Pack Save by ordering 5 packs for $39! PCB Pricing is $4.50 for the PCB. Shipping is $5 for USA, $17 for the rest of the world. *** NOTE: The color of the PCB will be green instead of purple shown in some of the pictures. *** Payment To order, please go to my site - http://www.theledart.com/blog/archives/259. Click on "Add to cart" button and check out via PayPal. Please send messages or leave comments here if you have questions. Thanks!

Topic by ledartist   |  last reply


i wana make night vision with a old camera

I have its the polaroid photomax fun flash but i put in the batteries to test it out and it doesnt seem to work i really just wasnt the screen from it but idont know if its shot or not i could prolly find a better actual lens tube for the picture but i would rather use the smaller screen cause my other option is a samsung sync screen which is huge and would be used by 2 instead of one eye? u have any ideas on how to just utilize the scren or something.it has one ribbon and to litlle tiny wires coming out of a box its really tight.

Question by crazycommanche=US=   |  last reply