Wiring help!

I have an 8th grade science class (I'm the teacher) that I would like to have construct underwater vehicles.  The kids will be using 9v batteries, switches and assorted other materials.  Does anyone know of any good books/articles that explain the basics of wiring, electricity, motors, switches, etc.  that I can have the students read to get a good base of knowledge in the basics of electronics? Thanks!!!

Topic by mashmtz   |  last reply


Wiring Question

Ok, I recently purchased a Go-Ped for practically nothing, and I really, really, really want to fix it up. I want to mount a couple of LED powered bicycle headlights on the front, and a tail light on the back. However, I want to be able to turn them all on and off via a single switch, mounted to the handlebars.I know very little about wiring, but I do know that most bicycle lights require physical pressure to power them on or off. Maybe there's something that can go between the batteries and bulbs?Any input you can provide would be fantastic!-Ryan

Topic by ryry214   |  last reply


microphone wiring?

Ok i was wondering if i took a microphone that was real cheap from walmart and take the male part off the end of it and put a female part so that way i can plug in a dual male sided cord to it and then to my computer, more or less im wondering, can it work like that? and then i was wondering if there is a program that when i plug the mic in that it works like plugging a guitar into an amp, as in it plays the input to the computer outloud without being in playback from a recording

Question by ClemensY290   |  last reply


Dollhouse wiring

Hi All. I'm a believer in the idea that anyone can do anything with a little info. But I'm in need of a little help.  I'm building a dollhouse for my niece and would like to add a little higher-tech slant (she won't be playing with this for a few years yet...)  I would like to add LED lights (which I will make but just have to wire for at the moment), a flicker fireplace and a door bell all on wall mounted pushbutton switches.  Feel free to suggest anything else that might be cool for a kid... The whole system will run on a 12V adapter but since I need to wire this NOW so I can continue to build, I need a drawing or schematic of how to do it. I've attached a pic of the house and have been pulling apart some of the small flicker Tealights to kitbash into the fireplace.  I have a number of white LEDs with which to make the lights but they don't have to go in right now.  I know I'll need some resistors - where do I place them?  Hide them in the walls?  On each switch? Anyways - any help is so appreciated.  She'd never get anything like this unless I made it for her - I just want it to be so cool that her brothers are impressed! Tbird

Topic by Golftester   |  last reply


Battery Wiring?

I have new Li-ion batteries for my mac but i wasn't completely sure on how to wire it up to the old circuitry. I know that "vg" is the ground and the "vp" is the positive. I am assuming "vl" goes to the wire "vl" i dont know what that is thought.  But there is a "vh" spot on the new battery but on the old circuitry there was no wire going to there? Do I solder that wire there? There is also two very thin wires labeled ntc, i can not find a spot on the old circuitry for that is it necessary?

Question by Aaamazzara   |  last reply


#16 wire

I have a schematic that says i need #16 wire to make an inductor, how do i find that size, what is the translation in mm? if anyone finds some could they give me a link please. thankyou

Topic by andrewlapham2010   |  last reply


Wire Transistor?

How can I make a wire transistor? It needs to work quite well and has to be stable. Please help either with a picture and description or a schematic. Thanks to you guys in advance.

Question by tzq33tdq   |  last reply


Wired Then and Now

When I visited MITERS last month, someone was giving away their entire collection of Wired Magazine. I happen to have a current issue in my bag, and it was fun to compare their relative sizes. It's interesting that I also happen to be wearing a Digg shirt in the picture...

Topic by ewilhelm   |  last reply


Microphone wiring? Answered

I have a broken microphone. Its wire is cut  inside the insulation. i want to replace the entire cable. when i removed the plastic cover of the microphone i saw a red and a black wire soldered to it.  Therefore it uses only 2 wires but in the connector it is a TRS one not a TS one. i will also replace the connector.  i am wondering how should i wire a TRS connector which has 3 leads. one being the common ground. but the other 2.  should i short them out and connect the red wire or must I connect the wire to only one lead?  Then if i buy a $0.2 TS connector and i wire it accordingly. will it work? One another question does the microphone device has polarity that is should i connect  positive to positive and negative to negative lead. because there is no indication on the Mic?

Question by ARJOON   |  last reply


joystick wireing ? Answered

Hi , i need to wire a small joystick extracted from a toy remote control. It is life a ps2 joystick. it is working with 2 potentiometre. if you can make a picture It will be very nice

Question by copper tube   |  last reply


Wire to Wireless? Answered

I purchased some XCam2 cameras, They are hard wired. Due to the need where to locate them, I would need them to become wireless. This is a great site along with some great minds. Thank you all for your input.

Question by Boriqua   |  last reply


nichrome wire

I got some nichrome wire off eBay, and it works great but when I connected it to a 9 volt battery it barley got hot, then I attached it to 4 x AA batteries and it got red hot. why is this? I don't understand because the 9 volt gives out 9 volts(duh) , but the 4x AA batteries only gives out 6 volts.

Topic by Jordo   |  last reply


Wiring question?

Hi everyone. Long time visitor of Instructables, made a few items I've seen and my most recent project was adding a star power pedal to my guitar hero controller. I bought a audio extension cable with a male and female jack, 1/8th size. I cut the cable about six inches from the female end. I stripped about an inch, inside was a bundle of copper wire wrapped around a clear insulted wire. I twisted the exposed copper wire and tinned it, I stripped the clear housing and twisted it, tinning them as well. I tinned the exposed wire to the GND, and the clear to Select. Positioned the jack and everything went well. I took the male cable, connected it to momentary switch and connected the male cable to the female jack. Turned on the system and controller. Got star power and hit the switch with no response. I'm very confident in my soldering and know I did it correctly, so I was wondering: 1) Are these kind of cables capable of doing what I intend? 2) Maybe the GND or the Select button are shorted out on the board of the controller? Thanks for any help everyone!

Topic by Mercenary Wubby   |  last reply


Help with wiring

I have disassembled an old vacuum cleaner that runs on 240v/5amps/1200w. I wanted to obtain the electric motor that should perform at 1.5 horsepower. As I was taking it apart I forgot how the switch leads were originally configured. I want to give the motor a test run but I don't want to hit the fuse in my house so I was hoping someone can help me plug the switch in the normal configuration. What order do the brown and blue plugs (that comes from wall plug) fit into the switch? And what order do the blue plugs (goes to motor) fit into the switch? A silly question really but I am new to working with electronics.

Topic by Tyoon   |  last reply


Wiring help

Hi guys I am need of some advice and help if possible, I will try and explain as clear as I can. I have a lockup which I have modified to use locking bolts on a motor and I have a swipe card reader and pcb which when swiped it fires the output to power the motor (6v) which works perfect for 6 seconds of the locking bolts going in and out. I am looking for a way so when the locking bolts go to the locked position it hits some kind of limit switch and stops there (which I have done in the past) but then I want to be able to swipe my card to open the bolts and when it gets to he open position it hits another limit switch and stays open until I want to swipe and close the locking bolts. I don't want this to be timed I need this to stop on open and closed position but able to operate when either is pressed, Can this be done in anyway?

Topic by sherpin2000   |  last reply


is a brown wire the same as a black wire?

Usb cable. and no there is no black wire

Question by DJZizo123   |  last reply



4 wires fan to 2 wire

Hi guys, i need your help! I have an Enermax 12cm fan (EB122512H), i need to plug it to a 12v DC power supply but i don't know how to wire it; The fan has 4 wires (yellow, black, white, red) but the power supply has just two wires. could you help me?

Question by MichelS7   |  last reply


2 Wire Servo on 3 wire reviver? Answered

How can i wire a 2 wire servo into a 3 wire receiver I'm talking about the motor type, The reason i need to do this is because i need to get a cheap RC car on good radio gear

Question by Daniel Deacon   |  last reply


Powering electro luminescence wire (EL wire)

I was planning on doing some work with EL wire, but I didn't want to use a battery powered system.  I wanted to be able to plug the whole thing into a wall outlet for power, because I thought that would be nice and convenient and all that, but I had some questions: 1)     Would I need to reduce the voltage of the outlet first?  It's a standard 120 volt outlet. 2)     What components would I need between the outlet and the wire itself to make it work? 3)     What length would of wire could I expect to light with this setup?  What is the limiting factor? I'd appreciate it if anyone could help me.  I haven't ever tried this before, and haven't really explored EL wire before.  Thanks!

Topic by Avren5   |  last reply


wiring diagram website?

What is a good wiring diagram website. i knew one before but i forgot the link. you would give it information and it would give you a diagram.

Question by diy guy   |  last reply



Philips Presenter SNP6000 Battery Wiring?

I have a Philips Presenter SNP6000 part of the Battery Terminals are missing and I don't see where they're supposed to be attached, any advice on where to find a wiring schematic 

Question by kevinborah   |  last reply


Looking for help.

I am currently trying to complete a project but cant seem to find anything that would work for it. I am trying to make a system that connects to a wire and on the end of the wire is a resistor of some size then it comes back to the box im trying to make and displays a light saying 1. for wire 1. Then move to the next wire and check it and it would display a 6 for resistor system 6(different size resistor for each number) . Check picture for better understanding... http://img.skitch.com/20101031-fhnufcw7axk1kesj7g4yq1qfrd.jpg

Topic by cheatcode1994   |  last reply



wire electric in house?

Question by acherryl   |  last reply


Wiring a USB to speakers

I want to wire a usb female end to my speakers so I can use the ipod connector instead of a 3.5 mm headphone jack, how would I wire it up?, the usb has 4 colored wires red, blk, wht, grn, and a bare wire. My speaker wires have 1 pos. and 1 neg.  So, how would I wire the usb to work?.

Question by bigdaddysdaddy   |  last reply


mini drone wiring

Hello guys i'm building my first drone using the arduino pro mini , i'm following this tutorial https://www.instructables.com/id/SpeechVoice-Controlled-Arduino-Drone/ on how to build it but i have a problem with the wiring , i've connect the battery to the arduino and also the hc-05 but i'm having problem with wiring the rest i've uploaded a picture of my wiring so far can someone please help me wiring the rest. http://imgur.com/dK4cRFy thanks!

Topic by omarb22 


How to wire this microphone? Answered

I am wondering how to wire this microphone. I took it off an old kit and i am just wandering as it may come in hand. Thanks Oscar

Question by oscarthompson   |  last reply


LED Wiring Question

Prologue:  Please be gentle...once I get past V=IR and the "right-hand" rule, I'm lost to electronics.  But I can solder and follow a schematic. I have several (7) LED sets (each set = 10 LEDs with power pack containing 2 AA batteries, switch, and resistor).  Each set of LEDs are all the same color (if that makes a difference). Image attached. Question:  Is there a way to connect all LED sets to operate with a single switch and maintain each set with it's own power supply? On a lighter note, I'm building a project for some pre-schoolers and want to hide all wiring and switches from those "inquiring minds" and "wandering" hands. Thx in advance. Paul D

Topic by PDevline 


Induction Motor Wiring?

Hi, I've recently bought a Clarke Induction Motor with these specs: 230V 1 Phase 2 h.p. 1.5 kW 1330 rpm 50 Hz 9.4 Amps Capacitor Details: 50 micro Farads 450 V I have been looking all over the internet on how to wire it up to go into 240V mains (UK) but I can't find a thing. In the terminal box there are 6 terminals labled V1, V2, U1, U2, W1, W2. A brown wire connected to U2 and a blue wire connected to W2 lead off to the capacitor.  A red wire connected to V2 and a white wire also connected to W2 leads off into the motor. Another red wire connected to V1 and another white wire connected to W1 also lead off into the motor. Nothing is yet connected to U1. Please see the pictures which make this a lot clearer. (I have removed the capacitor from the blue catch for the photos) I have looked all over the internet and there seems to be no mention of anything. I basicly need to plug this into mains (therefore 3 wires, live, neutral and earth - obviously earth goes to the motor casing) So which wires go where? Also, the website of the shop that I bought it off said that a 10-16 Amp starter is required. What does this mean/do? Can you just plug it into the mains without this starter. It is probably obvious that I am somewhat of a rookie in motors! Thanks very much in advance for any help!

Question by Zouaoua   |  last reply


Question on picoPSU wiring

First time forum poster - Hi everyone. I've just purchased a picoPSU 120 (attached pic) for a custom build and it just arrived today. The DC power arrives through 2 cables (duh :), a black and white one.  For - I'm guessing - extensibility reason, the DC cable is cut in 2 half with a 4 Pin Male/Female connector. On that connector, there's the two cables coming in, and the two cables coming out on the other side - all good. But then (as you can see in the second pic) they also do a weird cable loop of the two cables using the spare input/outputs on the connector. Why is that? I don't quite get what it is meant to do.. ? Ben

Topic by ben_dog   |  last reply


Easy wiring projects

I have seen beginner electronics projects but most of the things that they make arent really functional theyre just kinda display things like led throwers or custom made circuit board. I want to learn electronics but not by reading a guide but by doing the diy projects that create electronics items that are functional....does anyone know of any?

Topic by acadena2   |  last reply


Wiring some speakers? Answered

I'd like to hook my ipod up to these speakers but I don't know if my ipod wil get fried. I'm going to take headphones, take off the buds, and attach the wires to these big speakers. Can someone tell me if I need a regulator or something to stop my ipod from becoming toast?

Question by Adum24   |  last reply


Wiring Arduino Help

I included 2 images of the wiring I have. What seems to be the problem, when I push 1 button it changes the input of both of them. What's wrong? I'm almost 100% this is a wiring issue. I put an LED behind the bottom button, but when I push the top button, the LED turns off.

Topic by cwolter   |  last reply


Ethernet Wiring Order

Hi, I have a cat6 ethernet cable with 8 non-twisted wires all apparently being of different solid colors. Is it OK to attach both ends to the connectors in any order as long as both ends have the same color order? Since the colors are non-standard I can't go by any convention such as T-568A or T-568B. I am using this in my home and since it will be a one-off I don't care about convention standards as long as the configuration I use will work. By the way, do I need to be concerned about the fact that they are non-twisted wires? What's the difference anyway? I would appreciate your answer. Thanks.

Topic by oclaman   |  last reply


Wiring a Bubble Machine Answered

Hi I have a bubble making machine which recently had to have the capacitor and transformer replaced. However, I cannot get the machine to run the fan when its all connected. I think the wiring is all a bit of a mess, and I am wondering if someone can help me find a solution to get it to operate again. At the moment when the blades in the diagram are connected to the 3 pin switch only the motor which rotates the wheel for the bubble machine operates, the fan does not work. I have tried others (I have assumed these work but I don't know how to test them independently) but no success. I am unsure if the capacitor is wired correctly either, as reading about it online I have found that one pin is negative and the other is positive :(Also, I swapped the old transformer (see attached) for a replacement led transformer for running 12 volt light, I don't know if this was a suitable replacement. Please help me!!

Question by KulvinderBoparai   |  last reply


What's wrong with this wiring?

I've finally decided to undergo my first real electronics project - building a quad-NAND synth ( as per http://www.misusage.org/wordpress/?p=23 ). It's basically a simple oscillator run through each NAND gate of a 4000 series CMOS IC, fed into each other for manipulation. This is also my first time actually translating schematics to a breadboard, which I've attempted haphazardly - see my attached image. My questions are the following: How many errors have I run into? If I were to test this oscillator, how would I go about installing the audio jack? Am I grounding this correctly? Thanks!

Question by cshields1   |  last reply


Nichrome wire problem...

Just have a little problem that im sure a lot of you have the answer... I try to put a Nichrome wire on come copper wire but the copper wire is always burning (when the Nichrome get red and hot [really need its ^^])so i lose the connection between the Nihrome wire and the copper wire....What should i do? use big fat copper wire?

Topic by koax   |  last reply


Transformer-winding wire

I am going to be hand-wiring up a large lot of transformers. Someone has told me there is an enameled wire (magnet wire) whose coating melts when you dip it in solder (also tinning the copper tip at the same time). What is this type of wire called? I am having a hard time searching for it. Thanks!

Topic by samurai1200   |  last reply


Wire problem help?

Hi all, I have been trying to extend my laptop LCD wires to move it away from the laptop,as it only has about 15cm reach at the moment. It is very hard to do as the the wires are very tiny.It was going ok until I ran into a problem with the last four wires.The last four wires are small enough as it is but when I riped off the ends I found that there are two wires inside and some metal wire stuff around them. My problem is i'm not sure if the metal stuff around the two wires (white and purple) is a wire aswell or if it's some sort of protection layer? Another question I have is,will using bigger wires to extend the little original wires cause any harm to the signal? Here is a couple of pics to help. Cheers for any help!  

Question by luther303   |  last reply


Which wire is positive?

I have an electret mic that I want to use, but it has green and a black wires on it, would green be positive? Or would black be?

Question by Zem   |  last reply


Wiring Capacitors In series?

What are rules for wiring multiple capacitors in series? Especially when The voltages are different. If i wire two 80v's with a 200v what would my WV be?

Question by erncar   |  last reply


tesla coil wire

What Gauge. Wire would you use to make a 2 foot tesla

Topic by wiccakingkamui   |  last reply


what is el wire.? Answered

i heard of EL wire from the front page of Instructables and I want to know what it is.

Question by mechaninja   |  last reply


How to wire this transformer? Answered

ok, anyone know how to connect this transformer to mains power .. i get this from my UPS backup ..

Question by ishan udyoga   |  last reply


Help with ground wiring?

Ok, I am extremely new to doing anything with electronics. I'm working on a project where I am connecting some LEDs and some toggle switches. On some instructables I was looking at it mentions having a ground wire. What do I use for a ground wire? Is it a special type of wire? Anything specific I need to know? Thanks for your help in advance.

Question by payne.kj   |  last reply


EL Wire Questions

Does anybody know if it possible to make your own El wire controller thingy? Ohh and how many volts does El wire operate on. I want to put some on a pair o headphones to make the glow.  Around 3 volts maybe??? And if anybody has some El wire scraps laying around could I use them?? All I need is at most three feet. My budget is rather limited. Thanks everyone!!!!

Topic by jackjackboom   |  last reply


how to wire led?

CAN ANYONE GIVE ME DETAILS ON WIRING LED LIGHTS AND SOLDERING INSTRUCTIONS AS I AM IN THE DARK ON THIS ONE MAINLEY SOLDERING LEDS INTO CIRCUIT BOARD

Question by morgie   |  last reply


Soldering Wires to a Battery

So...If I were to solder a wire to a battery...Is that legal? I mean, will it like explode, or melt, or go haywire or whatever? Or will there be no problems at all, whatsoever? Thanks!

Topic by Joe426   |  last reply